+ Trả lời bài viết
Trang 34 của 36 Đầu tiênĐầu tiên ... 24 25 26 27 28 29 30 31 32 33 34 35 36 CuốiCuối
Kết quả 331 tới 340 của 352
  1. #331
    Super Moderator namnhatrang's Avatar
    Ngày tham gia
    Jan 2007
    Bài viết
    4,576
    Cám ơn !!!
    33
    Thanked 230 Times in 175 Posts

    Mặc định





    VolcanoBox Inferno is the World's Hottest Universal Tool
    VolcanoBox Inferno Support Maximum Secure Boot Phones than other Tools
    What's new in VolcanoBox Inferno MTK 1.3.5 ?

    • World's 1st Added New Way to Boot MTK Secure Phones
      • by this way 99% Secured Phones are Supported*
      • by this way you can Read Extended Info of 99% Secured MTK Phones*
      • by this way you can Read Factory File of 99% Secured MTK Phones*
      • by this way you can Write Factory File of 99% Secured MTK Phones*
      • by this way you can Unlock FRP lock of of 99% Secured MTK Phones*
      • by this way you can do many other operation.
        • How it will work ?
          • if you get any secured phone which is unable to boot. you have to find it's factory file and from factory file you have search for it's "DA" and "Auth" file.
          • From Inferno MTK Tick on "Manual Secure boot"
          • Perform your desire operation
          • while booting Inferno will ask you for select "DA" file . kindly browse and select "DA" file of your desire phone and click on ok.
          • then it will ask you to select "AUTH" file. if phone need "AUTH" file to boot complete then you have to brows and select other wise simple cancel it.
          • your phone will be boot-up and your selected desired operation will be done.
            • Special Note
              • Some phones need only "DA" Files for Boot
              • Some phones need "DA" and "Auth" file to boot
              • Some Phones Need Only "Auth" File to boot.
              • Users are Advised to use this Function to their own Experience.


      • World's 1st Added Qmobile Cs1 PLUS Phone Support
        • World's 1st Added Qmobile Cs1 Plus Unlock FRP Lock
        • World's 1st Added Qmobile Cs1 Plus Read Factory File
        • World's 1st Added Qmobile Cs1 Plus Write Factory File
        • World's 1st Added Qmobile Cs1 Plus Fully Supported
      • FIXED Qmobile i6 Metal 2017 Phone Support
        • Fixed Qmobile i6 Metal 2017 Read Factory File
        • Fixed Qmobile i6 Metal 2017 Write Factory File
        • Fixed Qmobile i6 Metal 2017 Unlock FRP Lock
        • Fixed Qmobile i6 Metal 2017 Fully Support
      • World's 1st Added Symphony V120 Phone Support
        • World's 1st Added Symphony V120 FRP Unlock
        • World's 1st Added Symphony V120 Factory File
        • World's 1st Added Symphony V120 Factory File
        • World's 1st Added Symphony V120 Support
    • World's 1st Added Manual Boot Files at Support Area
      • Here is some very Exclusive List of Boot Files Uploaded at Support Area
        • Huawei
          • CUN_L21
          • CUN_L22
          • CUN_U29
          • G730_U10
          • LUA_L01
          • LUA_L22
          • LUA_U22
          • MYA-L02_FRP
          • MYA-L03_FRP
          • MYA-L11_FRP
          • MYA-L22_FRP
          • MYA-L23_FRP
          • MYA-L41_FRP
          • Y6_Pro_TIT_AL00
        • INTEX
          • INTEX ELYT E7
        • LEECO
          • LE 1S
        • LENOVO
          • A2016
          • A6600a40
          • C2_K10a40
          • S1La40
          • Tab3_730X
        • MOBIWIRE
          • KOHANA
        • MOTOROLA
          • XT1721
          • XT1760
          • XT1755
        • QMOBILE
          • CS1
          • J1
          • i6 METAL 2017
          • CS1 PLUS
        • Nokia
          • Nokia_3
        • Oppo
          • F3
        • TECHNO
          • i3
          • i5 PRO
        • TRUE SMART (THAILAND)
          • TRUE SMART SPEEDY
        • WIKO
          • HARRY
          • KARRY
        • ZTE
          • A520


    << World 1st Symphony V120 Secure Boot V7.0 Full Support By Volcano Inferno >>

    [/CODE]Beta Test Reports : Mtk Secure Devices Test Are Started|Specially Made It For MTK SECURE Lovers
    Manual Boot Files : Index of ./VolcanoBox/Volcano_Inferno_Updates/Inferno_MTK_Module_Updates/Inferno_MTK_Manual_Boot/
    Support Area to Download : Index of ./VolcanoBox/Volcano_Inferno_Updates/Inferno_MTK_Module_Updates/

    Inferno with IMEI versions

    https://drive.google.com/drive/folde...jQ?usp=sharing

    Inferno without IMEI versions

    https://drive.google.com/drive/folde...FE?usp=sharing

  2. #332
    Super Moderator namnhatrang's Avatar
    Ngày tham gia
    Jan 2007
    Bài viết
    4,576
    Cám ơn !!!
    33
    Thanked 230 Times in 175 Posts

    Mặc định

    VolanoBox Inferno MTK1.3.6 World's 1st Added More MTK Secure Phones Qmobile etc






    VolcanoBox Inferno is the World's Hottest Universal Tool
    VolcanoBox Inferno Support Maximum Secure Boot Phones than other Tools
    What's new in VolcanoBox Inferno MTK 1.3.6 ?


    • World's 1st Added New Way to Boot MTK Secure Phones
      • by this way 99% Secured Phones are Supported*
      • by this way you can Read Extended Info of 99% Secured MTK Phones*
      • by this way you can Read Factory File of 99% Secured MTK Phones*
      • by this way you can Write Factory File of 99% Secured MTK Phones*
      • by this way you can Unlock FRP lock of of 99% Secured MTK Phones*
      • by this way you can do many other operation.
        • How it will work ?
          • if you get any secured phone which is unable to boot. you have to find it's factory file and from factory file you have search for it's "DA" and "Auth" file.
          • From Inferno MTK Tick on "EXPERT MODE"
          • Perform your desire operation
          • while booting Inferno will ask you for select "DA" file . kindly browse and select "DA" file of your desire phone and click on ok.
          • then it will ask you to select "AUTH" file. if phone need "AUTH" file to boot complete then you have to brows and select other wise simple cancel it.
          • your phone will be boot-up and your selected desired operation will be done.
            • Special Note
              • Some phones need only "DA" Files for Boot
              • Some phones need "DA" and "Auth" file to boot
              • Some Phones Need Only "Auth" File to boot.
              • Users are Advised to use this Function to their own Experience.





      • World's 1st Added Qmobile J2 Phone Support
        • World's 1st Added Qmobile J2 Unlock FRP Lock
        • World's 1st Added Qmobile J2 Read Factory File
        • World's 1st Added Qmobile J2 Write Factory File
        • World's 1st Added Qmobile J2 Fully Supported
      • World's 1st Added Symphony i10 Plus Phone Support
        • World's 1st Added Symphony i10 Plus FRP Unlock
        • World's 1st Added Symphony i10 Plus Read Factory File
        • World's 1st Added Symphony i10 Plus Write Factory File
        • World's 1st Added Symphony i10 Plus Complete Support

    • World's 1st Added Manual Boot Files at Support Area
      • Here is some very Exclusive List of Boot Files Uploaded at Support Area
        • Huawei
          • CUN_L21
          • CUN_L22
          • CUN_U29
          • G730_U10
          • LUA_L01
          • LUA_L22
          • LUA_U22
          • MYA-L02_FRP
          • MYA-L03_FRP
          • MYA-L11_FRP
          • MYA-L22_FRP
          • MYA-L23_FRP
          • MYA-L41_FRP
          • Y6_Pro_TIT_AL00
        • INTEX
          • INTEX ELYT E7
        • LEECO
          • LE 1S
        • LENOVO
          • A2016
          • A6600a40
          • C2_K10a40
          • S1La40
          • Tab3_730X
        • Symphoney
          • V120
          • i10 Plus
          MOBIWIRE
          • KOHANA
        • MOTOROLA
          • XT1721
          • XT1760
          • XT1755
        • QMOBILE
          • CS1
          • J1
          • i6 METAL 2017
          • CS1 PLUS
          • J2
        • Nokia
          • Nokia_3
        • Oppo
          • F3
        • TECHNO
          • i3
          • i5 PRO
        • TRUE SMART (THAILAND)
          • TRUE SMART SPEEDY
        • WIKO
          • HARRY
          • KARRY
        • Yuphoria
          • YU5011
        • ZTE
          • A520






    << World 1st Symphony i10 Plus Secure Boot V7.0 Full Support By Volcano Inferno >>



    Read Information(Extend)


    Code:
    >>Current Task:
              Read Information(Extend)
    >> 
    >>EXPERT MODE
    >>DA File:Symphoney i10plus.bin
    >>DA Ver.:MTK_AllInOne_DA_v3.3001.00.00
    >>
    >>Operation:
              1. Power off the phone.
              2. Please insert USB cable within 40 seconds.
    >> 
    >>MediaTek PreLoader USB VCOM (Android) (COM35)
    >> 
    >>Connecting...
    >>CPU TYPE:MT6580
    >>Hardware version:CA00
    >>Software version:0000
    >>SecCfgVal :0x01000000
    >>BromVersion :0xFF
    >>BLVersion :0x01
    >>Boot downloading complete!
    >>EMMC_ID:0x150100464536324D4203FF27CEE774B7
    >>EMMC_PRODUCT_NAME: 0x464536324D42
    >>EMMC_BOOT1_SIZE: 0x00400000
    >>EMMC_BOOT2_SIZE: 0x00400000
    >>EMMC_PRMB_SIZE: 0x00400000
    >>EMMC_GP1_SIZE: 0x00000000
    >>EMMC_GP2_SIZE: 0x00000000
    >>EMMC_GP3_SIZE: 0x00000000
    >>EMMC_GP4_SIZE: 0x00000000
    >>EMMC_USER_SIZE: 0x3A3E00000(14.56 G)
    >> 
    >>INT RAM: 128KB SDRAM    EXT RAM: 1GB DRAM
    >>Find partition success.
    >> 
    >>Total partition entries found: 24
    >>preloader:>>addr:0x000000  -- length:0x040000
    >>pgpt:>>addr:0x000000  -- length:0x080000
    >>proinfo:>>addr:0x080000  -- length:0x300000
    >>nvram:>>addr:0x380000  -- length:0x500000
    >>protect1:>>addr:0x880000  -- length:0xA00000
    >>protect2:>>addr:0x1280000  -- length:0xA00000
    >>seccfg:>>addr:0x1C80000  -- length:0x040000
    >>lk:>>addr:0x1CC0000  -- length:0x060000
    >>boot:>>addr:0x1D20000  -- length:0x1000000
    >>recovery:>>addr:0x2D20000  -- length:0x1000000
    >>para:>>addr:0x3D20000  -- length:0x080000
    >>logo:>>addr:0x3DA0000  -- length:0x800000
    >>expdb:>>addr:0x45A0000  -- length:0xA00000
    >>frp:>>addr:0x4FA0000  -- length:0x100000
    >>nvdata:>>addr:0x50A0000  -- length:0x2000000
    >>metadata:>>addr:0x70A0000  -- length:0x2760000
    >>oemkeystore:>>addr:0x9800000  -- length:0x200000
    >>secro:>>addr:0x9A00000  -- length:0x600000
    >>keystore:>>addr:0xA000000  -- length:0x800000
    >>system:>>addr:0xA800000  -- length:0xC0000000
    >>cache:>>addr:0xCA800000  -- length:0x10000000
    >>userdata:>>addr:0xDA800000  -- length:0x2C8580000
    >>flashinfo:>>addr:0xFFFF0084  -- length:0x1000000
    >>sgpt:>>addr:0xFFFF0004  -- length:0x080000
    >> 
    >>BasicInfo :
    >>Brand     : Symphony
    >>ProdName  : i10_plus
    >>ProdModel : i10 plus
    >>Device    : i10_plus
    >>AndroidVer: 7.0
    >>MTK CPU   : MT6580
    >>MTK PRJ   : alps-mp-n0.mp2-V1_tinno6580.we.n_P136
    >>Display ID: i10_plus_HW1_V5
    >>Board ID  : 
    >>Build Date: Thu Jul 13 19:15:04 CST 2017
    >>Custom Build Ver: i10_plus_HW1_V5
    >>Internal Build Ver: V3730AN_7.0_SYM_BD_06
    >>IMEI_1    :  3517xxxxxxxxxxx
    >>IMEI_2    :  3517xxxxxxxxxxx
    >> 
    >>Read phone info OK.
    
    >>Elapsed time: 00:00:26.
    Backup Facotry Files(FULL)


    Code:
    >>Current Task:
              USB Backup Facotry Files(FULL)
    >> 
    >>EXPERT MODE
    >>DA File:Symphoney i10plus.bin
    >>DA Ver.:MTK_AllInOne_DA_v3.3001.00.00
    >>
    >>Operation:
              1. Power off the phone.
              2. Please insert USB cable within 40 seconds.
    >> 
    >>MediaTek PreLoader USB VCOM (Android) (COM35)
    >> 
    >>Connecting...
    >>CPU TYPE:MT6580
    >>Hardware version:CA00
    >>Software version:0000
    >>SecCfgVal :0x01000000
    >>BromVersion :0xFF
    >>BLVersion :0x01
    >>Boot downloading complete!
    >>EMMC_ID:0x150100464536324D4203FF27CEE774B7
    >>EMMC_PRODUCT_NAME: 0x464536324D42
    >>EMMC_BOOT1_SIZE: 0x00400000
    >>EMMC_BOOT2_SIZE: 0x00400000
    >>EMMC_PRMB_SIZE: 0x00400000
    >>EMMC_GP1_SIZE: 0x00000000
    >>EMMC_GP2_SIZE: 0x00000000
    >>EMMC_GP3_SIZE: 0x00000000
    >>EMMC_GP4_SIZE: 0x00000000
    >>EMMC_USER_SIZE: 0x3A3E00000(14.56 G)
    >> 
    >>INT RAM: 128KB SDRAM    EXT RAM: 1GB DRAM
    >>Find partition success.
    >>MTKxCPU: MT6580
    >>ProdName: i10_plus
    >>ProdModel: i10 plus
    >>Device: i10_plus
    >>AndroidVer: 7.0
    >>Brand: Symphony
    >>MTKxPRJ: alps-mp-n0.mp2-V1_tinno6580.we.n_P136
    >>DisplayID: i10_plus_HW1_V5
    >>BoardID: 
    >>BuildDate: Thu Jul 13 19:15:04 CST 2017
    >>CustomBuildVer: i10_plus_HW1_V5
    >>InternalBuildVer: V3730AN_7.0_SYM_BD_06
    >> 
    >>Usb backup(full) may take more than 30 mins.
      >preloader_v3730.bin read success.
      >pgpt read success.
      >proinfo read success.
      >nvram.bin read success.
      >protect1 read success.
      >protect2 read success.
      >seccfg.bin read success.
      >lk.bin read success.
      >boot.img read success.
      >recovery.img read success.
      >para read success.
      >logo.bin read success.
      >expdb.bin read success.
      >frp read success.
      >nvdata.bin read success.
      >metadata read success.
      >oemkeystore read success.
      >keystore read success.
      >system.img read success.
      >BPLGUInfo read success.
      >userdata.img read success.
      >cache.img read success.
    >>Reading completed.
    >>Android_Info.txt create success.
    >>File save path:C:\Users\Biplob\Desktop\New folder (2)\MT6580_i10_plus_i10 plus_7.0_Symphony_alps-mp-n0.mp2-V1_tinno6580.we.n_P136_2017-09-14 19_22_01\
    >>Elapsed time: 00:10:28.
    Write Factory Files



    Code:
    >>Current Task:
              Write Factory Files
    >>BasicInfo :
    >>Brand     : Symphony
    >>ProdName  : i10_plus
    >>ProdModel : i10 plus
    >>Device    : i10_plus
    >>AndroidVer: 7.0
    >>MTK CPU   : MT6580
    >>MTK PRJ   : alps-mp-n0.mp2-V1_tinno6580.we.n_P136
    >>Display ID: i10_plus_HW1_V5
    >>Board ID  : 
    >>Build Date: Thu Jul 13 19:15:04 CST 2017
    >>Custom Build Ver: i10_plus_HW1_V5
    >>Internal Build Ver: V3730AN_7.0_SYM_BD_06
    >> 
    >> 
    >>EXPERT MODE
    >>DA File:Symphoney i10plus.bin
    >>DA Ver.:MTK_AllInOne_DA_v3.3001.00.00
    >>
    >>Operation:
              1. Power off the phone.
              2. Please insert USB cable within 40 seconds.
    >> 
    >>MediaTek PreLoader USB VCOM (Android) (COM35)
    >> 
    >>Connecting...
    >>CPU TYPE:MT6580
    >>Hardware version:CA00
    >>Software version:0000
    >>SecCfgVal :0x01000000
    >>BromVersion :0xFF
    >>BLVersion :0x01
    >>Boot downloading complete!
    >>EMMC_ID:0x150100464536324D4203FF27CEE774B7
    >>EMMC_PRODUCT_NAME: 0x464536324D42
    >>EMMC_BOOT1_SIZE: 0x00400000
    >>EMMC_BOOT2_SIZE: 0x00400000
    >>EMMC_PRMB_SIZE: 0x00400000
    >>EMMC_GP1_SIZE: 0x00000000
    >>EMMC_GP2_SIZE: 0x00000000
    >>EMMC_GP3_SIZE: 0x00000000
    >>EMMC_GP4_SIZE: 0x00000000
    >>EMMC_USER_SIZE: 0x3A3E00000(14.56 G)
    >> 
    >>INT RAM: 128KB SDRAM    EXT RAM: 1GB DRAM
    >>Phone Info: CPU:MT6580 Flash Type:EMMC
    
    >>Check CPU Success!
    >>Check Flash Type Success!
    >>Check FlashID Success!
    
    >>Find partition success.
    >>backup path:J:\New folder (4)\InfernoTool_MTK_EXT_Volcano_V1.3.5_20170912\MTK_Vol_EXT\backup\preloader_v3730_20170914_181539.bin
      >pgpt write success.
      >proinfo write success.
      >nvram.bin write success.
      >protect1 write success.
      >protect2 write success.
      >seccfg.bin write success.
      >lk.bin write success.
      >boot.img write success.
      >recovery.img write success.
      >para write success.
      >logo.bin write success.
      >expdb.bin write success.
      >frp write success.
      >nvdata.bin write success.
      >metadata write success.
      >oemkeystore write success.
      >keystore write success.
      >system.img write success.
      >cache.img write success.
      >userdata.img write success.
    >>Flash writing complete.
    >>Write factory file successfully!
    Clear FRP


    Code:
    >>Current Task:
              USB Clear FRP(EMMC)
    >> 
    >>EXPERT MODE
    >>DA File:Symphoney i10plus.bin
    >>DA Ver.:MTK_AllInOne_DA_v3.3001.00.00
    >>
    >>Operation:
              1. Power off the phone.
              2. Please insert USB cable within 40 seconds.
    >> 
    >>MediaTek PreLoader USB VCOM (Android) (COM35)
    >> 
    >>Connecting...
    >>CPU TYPE:MT6580
    >>Hardware version:CA00
    >>Software version:0000
    >>SecCfgVal :0x01000000
    >>BromVersion :0xFF
    >>BLVersion :0x01
    >>Boot downloading complete!
    >>EMMC_ID:0x150100464536324D4203FF27CEE774B7
    >>EMMC_PRODUCT_NAME: 0x464536324D42
    >>EMMC_BOOT1_SIZE: 0x00400000
    >>EMMC_BOOT2_SIZE: 0x00400000
    >>EMMC_PRMB_SIZE: 0x00400000
    >>EMMC_GP1_SIZE: 0x00000000
    >>EMMC_GP2_SIZE: 0x00000000
    >>EMMC_GP3_SIZE: 0x00000000
    >>EMMC_GP4_SIZE: 0x00000000
    >>EMMC_USER_SIZE: 0x3A3E00000(14.56 G)
    >> 
    >>INT RAM: 128KB SDRAM    EXT RAM: 1GB DRAM
    >>Find partition success.
    >>Clear FRP successfully!
    Wirte IMEI



    Code:
    >>Current Task:
              USB Wirte IMEI
    >> 
    >>EXPERT MODE
    >>DA File:Symphoney i10plus.bin
    >>DA Ver.:MTK_AllInOne_DA_v3.3001.00.00
    >>
    >>Operation:
              1. Power off the phone.
              2. Please insert USB cable within 40 seconds.
    >> 
    >>MediaTek PreLoader USB VCOM (Android) (COM35)
    >> 
    >>Connecting...
    >>CPU TYPE:MT6580
    >>Hardware version:CA00
    >>Software version:0000
    >>SecCfgVal :0x01000000
    >>BromVersion :0xFF
    >>BLVersion :0x01
    >>Boot downloading complete!
    >>EMMC_ID:0x150100464536324D4203FF27CEE774B7
    >>EMMC_PRODUCT_NAME: 0x464536324D42
    >>EMMC_BOOT1_SIZE: 0x00400000
    >>EMMC_BOOT2_SIZE: 0x00400000
    >>EMMC_PRMB_SIZE: 0x00400000
    >>EMMC_GP1_SIZE: 0x00000000
    >>EMMC_GP2_SIZE: 0x00000000
    >>EMMC_GP3_SIZE: 0x00000000
    >>EMMC_GP4_SIZE: 0x00000000
    >>EMMC_USER_SIZE: 0x3A3E00000(14.56 G)
    >> 
    >>INT RAM: 128KB SDRAM    EXT RAM: 1GB DRAM
    >>Find partition success.
    >>Write data success.
    >>Update IMEI success.
    Beta Test Reports : Mtk Secure Devices Test Are Started|Specially Made It For MTK SECURE Lovers
    Manual Boot Files : Index of ./VolcanoBox/Volcano_Inferno_Updates/Inferno_MTK_Module_Updates/Inferno_MTK_Manual_Boot/
    Support Area to Download : Index of ./VolcanoBox/Volcano_Inferno_Updates/Inferno_MTK_Module_Updates/

  3. #333
    Super Moderator namnhatrang's Avatar
    Ngày tham gia
    Jan 2007
    Bài viết
    4,576
    Cám ơn !!!
    33
    Thanked 230 Times in 175 Posts

    Mặc định

    VolcanoBox Inferno UniTool 1.4.1 Huawei Modems & Custom Partition by Logical Block


    What's new in VolcanoBox Inferno UniTool 1.4.1
    Added New way to Manage Custom Partition by Logical Block Address for Advance Users only !!
    Added Erase for Huawei E8372h-153 -> 21.313.xx.xx.306
    Fixed some VIVO phones not detecting by selecting Auto cpu.
    How to Unlock Huawei Modems with Inferno ?
    Open Inferno UniTool 1.4.1
    Go to Huawei -> Modem
    Connect Huawei Modem in usb
    in Normal mode
    Click on Read info.
    make sure you have installed Correct Drivers
    Check software ver inside your modem.
    go to back and select Erase and then select carefully your Modem model & Firmware ver
    Firmware ver you checked from Read Info.
    Check List Below which Modem & Ver Required Erase
    Connect Test Point
    Check List Below which Modem & Ver Required Testpoint
    you can download all Test Points from here https://www.mediafire.com/folder/ysz...ems_Test_point
    Make Sure in Device Manger have one Huawei port !!
    Write Huawei Modem Port number into Unitool Erase windows and click on next. it will Erase successfully.
    it will automatically reboot after successfully Erased
    in device manager it will show 2 ports after successfully Erased.
    Go to Huawei -> Modem -> Patch flash -> Select Modem Model & Firmware ver
    Select Same Modem & Firmware ver which you selected while Erasing & which was in modem before erase.
    click on Next and let it patch flash.
    After Patch Flash success, please look at list what operation needed for POST PATCH Flash.
    Some Modems need to Unlock by Inferno Unitool Unitool. V4 Unlock button. after patch flash
    Some modems need to repair Imei by Inferno UniTool
    Some modems need to Code calculate.
    You must update your modem Firmware to LATEST Firmware to run super fine.
    Make sure you Repair Wifi
    Kindly have a look at list below for each modems model.
    You have to Download HWModem.sys and Place into Inferno Unitool Folder


    Complete Details of each ver & steps you have to do while unlock


    Inferno EXT (with IMEI) versions
    https://drive.google.com/drive/folde...jQ?usp=sharing


    Inferno NI (without IMEI) versions
    https://drive.google.com/drive/folde...FE?usp=sharing

  4. #334
    Super Moderator namnhatrang's Avatar
    Ngày tham gia
    Jan 2007
    Bài viết
    4,576
    Cám ơn !!!
    33
    Thanked 230 Times in 175 Posts

    Mặc định

    What's new in VolcanoBox Unitool 1.4.2 ?

    • Added World's 1st GOOGLE Pixel Android 8.0 Imei Repair
      • You Must Unlock Boot loader...
        • How To Unlock bootloader ? Simple unlock it with Carrier (Online Unlock). after unlock by Carrier you can Enable "OEM Unlock" from Menu then get it Bootloader Unlock by "Platform tools"
        • You must be Root it by 3rd Party Tools. don't forget to update "SuperSU"
        • Connect Phone into Normal mode and Repair your IMEI with Inferno UniTool.
        • NEVER RELOCK YOUR BOOTLOADER....!! IT WILL BRICK YOUR PHONE.
    • Added Word's 1st GOOGLE Pixel XL Android 8.0 Imei Repair
      • You Must Unlock Boot loader...
        • How To Unlock bootloader ? Simple unlock it with Carrier (Online Unlock). after unlock by Carrier you can Enable "OEM Unlock" from Menu then get it Bootloader Unlock by "Platform tools"
        • You must be Root it by 3rd Party Tools. don't forget to update "SuperSU"
        • Connect Phone into Normal mode and Repair your IMEI with Inferno UniTool.
        • NEVER RELOCK YOUR BOOTLOADER....!! IT WILL BRICK YOUR PHONE.
    • Added World's 1st GOOGLE Pixel C Android 8.0 Imei Repair
      • You Must Unlock Boot loader...
        • How To Unlock bootloader ? Simple unlock it with Carrier (Online Unlock). after unlock by Carrier you can Enable "OEM Unlock" from Menu then get it Bootloader Unlock by "Platform tools"
        • You must be Root it by 3rd Party Tools. don't forget to update "SuperSU"
        • Connect Phone into Normal mode and Repair your IMEI with Inferno UniTool.
        • NEVER RELOCK YOUR BOOTLOADER....!! IT WILL BRICK YOUR PHONE.
        Here is Some Screen Shots.. Special Thanks to PHILS & FONE FUN SHOP











    • Added Button to put Huawei Modems into Download Mode
    • Added Support to send Direct Commands to Huawei Modems
    • Fixed Bug That on MTK's Part format function parts of phone format failed.
    • Added Support for MTK Brom Connectivity.

    Buy Now: GPGIndustries
    VolcanoBox Inferno Trusted Resellers: ➜ ➜ ➜ Inferno Activation & Renewal New Price is DOWN Now & Resellers List ◄ ◄ ◄ - GSM-Forum
    Support Area to Download VolcanoBox Inferno: Index of ./VolcanoBox/Volcano_Inferno_Updates/Inferno_UniTool_Module_Updates/

    Inferno EXT (with IMEI) versions
    https://drive.google.com/drive/folde...jQ?usp=sharing


    Inferno NI (without IMEI) versions
    https://drive.google.com/drive/folders/0B1-RQDhpiqbDM0poaHdWTmFDSFE?usp=sharing

  5. #335
    Super Moderator namnhatrang's Avatar
    Ngày tham gia
    Jan 2007
    Bài viết
    4,576
    Cám ơn !!!
    33
    Thanked 230 Times in 175 Posts

    Mặc định

    VolcanoBox Inferno MTK 1.4.1 ADDED World's 1st Full Support for MTK6570 & HIGH Boot





    What's new in VolcanoBox Inferno MTK 1.4.1 ?

    • Added World's 1st & Very Exclusive, Only In Inferno Added Full Support for
      MTK 6570 EMMC
      MTK6570 EMMC Success Read Info LOG...
      • All other Tools are not supported
      • All other Tools Shows it's as " MT633 "
        • Here is some log from some famous CM2 tool
          Code:
          Wait for phone...
          Phone found! [ 18 ]
          Sync...
          Inital Boot Ok!
          BB_CPU_PID : 0633
          BB_CPU_NME : [MediaTek] MTxxx
          BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
          Processing BROM stage
          Settings for BROM configured!
          SecCfgVal : 0x00000000
          BromVer : 0x00FF
          BLVersion : 0x0001
          PreLoader : Active [ Boot with PL ]
          BootLdrSS : NORMAL with PRELOADER
          Processing DA stage
          
          [DA_ERROR] : Correct BOOT CONFIGURATION not found for target!
          Try Re-Install CM2MTK module!
          Boot Error!
          
          Operation Failed
          Elapsed: 00:00:06
          Reconnect Power/Cable!
    • World's 1st & Exclusively Added MT6570 EMMC Read Extended Info
      • All other Tools are not Supported.
      • All other Tools shown MT633 & MT0633
    • World's 1st & Exclusively Added MT6570 EMMC Read Factory File
      • All other Tools are not Supported.
      • All other Tools shown MT633 & MT0633
    • World's 1st & Exclusively Added MT6570 EMMC Write Factory File
      • All other Tools are not Supported.
      • All other Tools shown MT633 & MT0633
    • World's 1st & Exclusively Added MT6570 EMMC Auto Format FFS
      • All other Tools are not Supported.
      • All other Tools shown MT633 & MT0633
    • World's 1st & Exclusively Added MT6570 EMMC Full Format FFS
      • All other Tools are not Supported.
      • All other Tools shown MT633 & MT0633
    • World's 1st & Exclusively Added MT6570 EMMC Custom Partition Format
      • All other Tools are not Supported.
      • All other Tools shown MT633 & MT0633
    • Few Bugs Solved Related to Detection.
    • Added New Function. "High Boot" "Low Boot" "Custom Boot" to Support Maximum kind of phones.
      • after run Inferno MTK by default "HIGH Boot" is Selected. if there is any phone which stop after "Download Boot complete" you can change it to "Low Boot" to check whatever it's complete it's Boot or not. if both "High Boot" and "Low Boot" Unable to boot any phone then you can use "Custom boot" and now here you have "FREE HAND" to do experiments. You can Select Manually "DA" or "Auth" or "Preloader" or All of them or any two or any one to make phone properly Boot. Also you can use "Custom Boot" for boot "Secure MTK Phones".
      • All Boots you can change from "Drop List" from "TOP, RIGHT" of VolcanoBox Inferno MTK Software
    Many MT6570 Emmc Phones like, Mobicel , Symphony , Blu , Doogee , BMobile , Lava , Fly , Doppio , Positivo , Azumi , Verykool , Polaroid , ETC Are Supported from This UPDATE !!!!! & No other Team SUPPORT IT !!!!


    Mirror Links:
    Code:
    MTK For Volcano Box
    
    https://drive.google.com/file/d/0B1-RQDhpiqbDWDdSN1ZEVjF3NTQ/view?usp=sharing
    
    https://drive.google.com/file/d/0B1-RQDhpiqbDVllxYnZwMVRuNjQ/view?usp=sharing
    
    MTK For Inferno Dongle
    
    https://drive.google.com/file/d/0B1-RQDhpiqbDQUhYUm5ZTG1HaHM/view?usp=sharing
    
    https://drive.google.com/file/d/0B1-RQDhpiqbDNkNZWnFTVkd5OTQ/view?usp=sharing

    Support Area to Download
    : Index of ./VolcanoBox/Volcano_Inferno_Updates/Inferno_MTK_Module_Updates/
    Buy Now: GPGIndustries

  6. #336
    Super Moderator namnhatrang's Avatar
    Ngày tham gia
    Jan 2007
    Bài viết
    4,576
    Cám ơn !!!
    33
    Thanked 230 Times in 175 Posts

    Mặc định

    VolcanoBox UniTool 1.4.6 Added Support for OPPO A39 A71 F3 & Vivo Y69 & More

    What's new in VolcanoBox Inferno UniTool 1.4.6 ?
    [/INDENT][/INDENT][/INDENT]
    • Added Support for OPPO A39
    • Added Support For OPPO A71
    • Added Support for OPPO F3
    • Added Support for VIVO Y69
    • Fixed Analysis Preloader.bin failed in Custom Boot.
    • Fixed bug that software crash when some samsung phones clear frp in download mode.

  7. #337
    Super Moderator namnhatrang's Avatar
    Ngày tham gia
    Jan 2007
    Bài viết
    4,576
    Cám ơn !!!
    33
    Thanked 230 Times in 175 Posts

    Mặc định

    VolcanoBox Inferno MTK 1.4.3 World's 1st Mobicel Dandy Rebel R1 Zen & Artel Z5
    • World's 1st Added New Way to Boot MTK Secure Phones
      • by this way 99% Secured Phones are Supported*
      • by this way you can Read Extended Info of 99% Secured MTK Phones*
      • by this way you can Read Factory File of 99% Secured MTK Phones*
      • by this way you can Write Factory File of 99% Secured MTK Phones*
      • by this way you can Unlock FRP lock of of 99% Secured MTK Phones*
      • by this way you can do many other operation.
        • How it will work ?
          • if you get any secured phone which is unable to boot. you have to find it's factory file and from factory file you have search for it's "DA" and "Auth" file.
          • From Inferno MTK Tick on "EXPERT MODE"
          • Perform your desire operation
          • while booting Inferno will ask you for select "DA" file . kindly browse and select "DA" file of your desire phone and click on ok.
          • then it will ask you to select "AUTH" file. if phone need "AUTH" file to boot complete then you have to brows and select other wise simple cancel it.
          • your phone will be boot-up and your selected desired operation will be done.
            • Special Note
              • Some phones need only "DA" Files for Boot
              • Some phones need "DA" and "Auth" file to boot
              • Some Phones Need Only "Auth" File to boot.
              • Users are Advised to use this Function to their own Experience.





      • World's 1st Added Artel Z5 Phone Support
        • World's 1st Added Artel Z5 Unlock FRP Lock
        • World's 1st Added Artel Z5 Read Factory File
        • World's 1st Added Artel Z5 Write Factory File
        • World's 1st Added Artel Z5 Fully Supported
      • World's 1st Added Mobicel Zen Phone Support
        • World's 1st Added Mobicel Zen FRP Unlock
        • World's 1st Added Mobicel Zen Read Factory File
        • World's 1st Added Mobicel ZenWrite Factory File
        • World's 1st Added Mobicel Zen Complete Support
      • World's 1st Added Mobicel R1 Phone Support
        • World's 1st Added Mobicel R1 FRP Unlock
        • World's 1st Added Mobicel R1 Read Factory File
        • World's 1st Added Mobicel R1Write Factory File
        • World's 1st Added Mobicel R1Complete Support
      • World's 1st Added Mobicel Dandy Phone Support
        • World's 1st Added Mobicel Dandy FRP Unlock
        • World's 1st Added Mobicel Dandy Read Factory File
        • World's 1st Added Mobicel DandyWrite Factory File
        • World's 1st Added Mobicel DandyComplete Support
      • World's 1st Added Acer Iconia One Phone Support
        • World's 1st Added Acer Iconia One FRP Unlock
        • World's 1st Added Acer Iconia One Read Factory File
        • World's 1st Added Acer Iconia One Write Factory File
        • World's 1st Added Acer Iconia One Complete Support
    • World's 1st Added Manual Boot Files at Support Area
      • Here is some very Exclusive List of Boot Files Uploaded at Support Area
        • Acer
          • Lconia One
        • Artel
          • Z5
        • Huawei
          • CUN_L21
          • CUN_L22
          • CUN_U29
          • G730_U10
          • LUA_L01
          • LUA_L22
          • LUA_U22
          • MYA-L02_FRP
          • MYA-L03_FRP
          • MYA-L11_FRP
          • MYA-L22_FRP
          • MYA-L23_FRP
          • MYA-L41_FRP
          • Y6_Pro_TIT_AL00
        • Lanix
          • Ilium_X520
          INTEX
          • INTEX ELYT E7
        • LEECO
          • LE 1S
        • LENOVO
          • A2016
          • A6600a40
          • C2_K10a40
          • S1La40
          • Tab3_730X
        • Symphoney
          • V120
          • i10 Plus
          • P8 Pro
        • MobiCel
        • MOBIWIRE
          • KOHANA
        • MOTOROLA
          • XT1721
          • XT1760
          • XT1755
          • Moto C
        • Q Plus
          • Neno
          QMOBILE
          • CS1
          • J1
          • i6 METAL 2017
          • CS1 PLUS
          • J2
        • Nokia
          • Nokia_3
        • Vodafone
          • VFD1100
        • Oppo
          • F3
        • Micromax
          • Q4310
          • MMX_Q4310
        • TECHNO
          • i3
          • i5 PRO
        • TRUE SMART (THAILAND)
          • TRUE SMART SPEEDY
        • WIKO
          • HARRY
          • KARRY
          • U PULSE LITE
        • Yuphoria
          • YU5011
        • ZTE
          • A520

    IF YOU HAVE VERY EXCLUSIVE BOOT FILES ( DA from Factory File ) of Secure Boot MTK Phones & Willing to Share with us even as Paid Please Contact me Privately !! We will pay you.


    Manual Boot Files : Index of ./VolcanoBox/Volcano_Inferno_Updates/Inferno_MTK_Module_Updates/Inferno_MTK_Manual_Boot/
    Support Area to Download : Index of ./VolcanoBox/Volcano_Inferno_Updates/Inferno_MTK_Module_Updates/
    Buy Now: GPGIndustries

  8. #338
    Super Moderator namnhatrang's Avatar
    Ngày tham gia
    Jan 2007
    Bài viết
    4,576
    Cám ơn !!!
    33
    Thanked 230 Times in 175 Posts

    Mặc định

    World's 1st VolcanoBox Inferno MTK V1.4.4 Release Hisense F23 FRP & Much More




    What's new in Volcanobox MTK 1.4.4 ?
    • World's 1st HiSense F23 FRP Solution
      • Special Thanks to Jorge Delgado Kzafquiel
      • Special Thanks to Rogelio Acosta RogerBoogie
        • How to do it ?
          • Download FRP By Pass file from Support area Index of ./VolcanoBox/Volcano_Inferno_Updates/Inferno_MTK_Module_Updates/Hisense_F23_FRP_Solution/
          • Extract File from RAR file (you have to enter password for Extract it and password can be seen in RAR Comment Windows)
          • Format MemCard with FAT32
          • Put *.Bin file into MemCard (Do Not Rename Bin File)
          • Power off Phone & put phone into Download/Update Mode
          • Updating will be started automatically and wait till it finish
          • After reboot, FRP will be Removed
          • This *.Bin is Factory Bin File So. it's Support All Securities Till now.
          • We had TESTED & it's working anyhow use it at your own Risk
    • HiSense F23 FRP Solution is Provided by VolcanoBox Inferno
    • HiSense F23 FRP Solution is for every one.
    • File is Password Protected you can see Password after download & open Rar file in comment Windows.

    • Added Support for MTK6580 Latest Security Patch
      • Fixed Support for MTK6580 Brom Connectivity
      • Fixed Support for MTK6580 Phone Connectivity with boot key
    • Added Support for MTK6735 Latest Security Patch
      • Fixed Support for MTK6735 Brom Connectivity
      • Fixed Support for MTK6735 Phone Connectivity with boot key


    IF YOU HAVE VERY EXCLUSIVE BOOT FILES ( DA from Factory File ) of Secure Boot MTK Phones & Willing to Share with us even as Paid Please Contact me Privately !! We buy from you.



    Support Area to Download : Index of ./VolcanoBox/Volcano_Inferno_Updates/Inferno_MTK_Module_Updates/
    Buy Now: GPGIndustries

  9. #339
    Super Moderator namnhatrang's Avatar
    Ngày tham gia
    Jan 2007
    Bài viết
    4,576
    Cám ơn !!!
    33
    Thanked 230 Times in 175 Posts

    Mặc định

    VolcanoBox 3 in 1 Updates

    VolcanoBox Inferno MTK Ver 1.4.5 Updates Released
    VolcanoBox Inferno Unitool ver 1.4.7 Updates Released
    Volcanobox Inferno DataPro Ver 1.4.4 Updates Released.


    • VolcanoBox Inferno MTK Ver 1.4.5
      • What's new ?
        • World's 1st added backup full flash of EMMC MT6570.
        • fix backup factory issue of samsung mt6572.
        • fix auto format issue of some mt6582 device.
    • VolcanoBox Inferno UniTool Ver 1.4.7
      • What's new ?
        • add read imei before modify imei in tool repair qualcomm imei function.
        • repair bug that read pattern lock fail when select custom boot.
    • VolcanoBox Inferno DataPro 1.4.4
      • What's new ?
        • Security Update, All old ver of Data pro will not work so user have to download new ver to use it.


    Support Area to Download : Index of ./VolcanoBox/Volcano_Inferno_Updates/
    Buy Now: GPGIndustries

  10. #340
    Super Moderator namnhatrang's Avatar
    Ngày tham gia
    Jan 2007
    Bài viết
    4,576
    Cám ơn !!!
    33
    Thanked 230 Times in 175 Posts

    Mặc định

    What's new in VolcanoBox Inferno UniTool 1.4.8?
    • Added Support for UFS Flash Phones
      • Added Support for Read Full UFS Flash phones
      • Added Support for Write Full UFS Flash phones
      • Added Support for Read Complete information of UFS Flash Phones
    • FIXED Vivo Phones Problems
      • Fixed VIVO MTK6755 Auto Format Failed Problem.
      • Fixed VIVO Y67 Boot Failed
      • Fixed VIVO Y67 Write Factory Failed at OEM Parition
      • Fixed VIVO other small issues
    • Improvements
      • Improved Inner flash programmer missed while writing full flash.
      • Improved Some Tips for user when write userdata in write factory file.


    Support Area to Download : http://gpgindustries.com/download/VolcanoBox/index.php?dir=Volcano_Inferno_Updates/Inferno_UniTool_Module_Updates/
    Buy Now: GPGIndustries

+ Trả lời bài viết

Thread Information

Users Browsing this Thread

Hiện có 5 người đang xem bài này . Bao gồm : 0 thành viên và 5 khách

     

Similar Threads

  1. NS Pro Update Post here
    By DNA in forum NS Dongle
    Trả lời: 72
    Bài viết cuối: 10-09-2016, 01:13
  2. GB-Key New Update AE Post Ở Đây
    By Lính Khang in forum Các thiết bị khác
    Trả lời: 0
    Bài viết cuối: 16-11-2012, 07:14
  3. Axe Box New Update AE Post ở đây
    By TuấnPhát_GSM in forum AxeBox
    Trả lời: 27
    Bài viết cuối: 16-01-2012, 09:38
  4. MT Box New Update AE Post ở đây !!!
    By HoangThong_hotrokythuat3 in forum MT-Box
    Trả lời: 35
    Bài viết cuối: 23-11-2011, 08:07
  5. CPF Box II New Update AE Post ở đây
    By TuấnPhát_GSM in forum CPF-BOX Ⅱ
    Trả lời: 7
    Bài viết cuối: 06-08-2011, 15:31

Quyền viết bài

  • Bạn không thể tạo chủ đề mới
  • Bạn không thể gửi trả lời
  • Bạn không thể gửi đính kèm
  • Bạn không thể sửa bài viết của bạn
Lên đầu trang
thiet bi sua chua slim sim, heicard, sim ghep Firmware android giải pháp nhà thông minh