[Xin giúp] log 1200 nhờ cao thủ

[uyếnhà]

MXKEY [MxKey Team HTI PLUS Flasher Interface 1], SN: C08593E1
Using device: HTI, FW ver: 00.50, SN: 0100BCDF
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0
Module ver: 1.0.0.20814(05-05-2012), Library ver: 1.0.0.14060(05-05-2012)
ASIC ID: 0x2293 [UPPCosto ver: 2.0]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 00EC 2268 [Samsung K8S3215ETE,32 Mbits] page size: 64 K type: NOR area: 01000000-013FFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF
Algorithm: u3_amd.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x78C0
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 00AC9C25A3BDA66
ASIC type: 11
UEM Imei: 35687302098642
Flash Imei: 35687302098642
RPL saved to "C:\mobileEx\3.5\data\backup\RPL\35687302098642_BA CK.rpl"
Processing MCU file: rh99_05.910
[DCT4,DCT4 ALGORITHM] size: 2.27 MB
Supported Ids: 2292
ASIC ID: 0x2293 [UPPCosto ver: 2.0]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 00EC 2268 [Samsung K8S3215ETE,32 Mbits] page size: 64 K type: NOR area: 01000000-013FFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF
Algorithm: u3_amd.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x78C0
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 00AC9C25:2984DA60
Area [01000000-0100FFFF] erased in 0.437 s
Area [01010000-013AFFFF] erased in 23.406 s
Area [013B0000-013EFFFF] erased in 1.594 s
Area [017C0000-017EFFFF] erased in 0.031 s
Area [01FC0000-01FEFFFF] erased in 0.032 s
Flash programming ...
Programming completed in 12.516 s
File processed in 49.922 s
Processing CNT file: rh990_nai5.91mr
[DCT4,DCT4 ALGORITHM] size: 110.59 KB
Supported Ids: 2292
ASIC ID: 0x2293 [UPPCosto ver: 2.0]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 00EC 2268 [Samsung K8S3215ETE,32 Mbits] page size: 64 K type: NOR area: 01000000-013FFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: AD7E B61A 1BBE 0BE2 7D58 6BE4 DBEE 6514
Algorithm: u3_amd.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x78C0
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 00AC9C25:2984DA60
Area [01380000-013AFFFF] erased in 1.250 s
Flash programming ...
Programming completed in 0.625 s
Extracting Content Pack, File Server fake reply for CUI phone.
Content Pack extracted successfully in 0.141 s
File processed in 21.281 s
Processing PPM file: rh99_05.91mr
[DCT4,DCT4 ALGORITHM] size: 1.13 MB
Supported Ids: 2292
ASIC ID: 0x2293 [UPPCosto ver: 2.0]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 00EC 2268 [Samsung K8S3215ETE,32 Mbits] page size: 64 K type: NOR area: 01000000-013FFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: AD7E B61A 1BBE 0BE2 7D58 6BE4 DBEE 6514
Algorithm: u3_amd.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x78C0
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 00AC9C25:2984DA60
Area [01240000-0124FFFF] erased in 0.422 s
Area [01250000-0137FFFF] erased in 7.656 s
Flash programming ...
Programming completed in 6.265 s
File processed in 22.187 s
Total time for flashing process(boot+erase+write) was 1 min 33.406 s


Phone type: RH-99
SW version: V 5.91 27-03-09 RH-99 (c) NMP
Imei plain: 35687302098642-8
Cellular system: GSM
ASIC ID: 0x2293, type: 0
Ppm Id: MR
Language Pack:
- not available.

Master code: 2710471461

Failed to read SP data

[uyếnhà]

em đá làm dc 3 năm nhung về phần mềm thi còn rất kém xin các bác chỉ giáo

[ThanhHai_GSM]

ASIC ID: 0x2293, type: 0

1200 thay cpu khác 2292

[Lính Khang]

Failed to read SP data

*Cái này bạn kiểm tra lại cáp,rồi flash cho em nó phát coi hết không,nếu không hết thì xóa file pm+nạp file pm full+unlock.Không hết thì thay CPU thôi.

[uyếnhà]

thak bác em ko còn con cpu 2292 nào đành láy cpu cua 1202 xang chay mãi ko dc. thak bác đế em kiếm con khác.

[DAKLAK-GSM]

có cao thủ THÀNH HẢI rùi đoá

[gsmmientrung]

2293 2292 gì đóng vào flash vào done là ok hết

[khanhmobile87]

1200 mà lấy cpu 1202 đóng vào thì ko đc rồi

[hachanyen]

1202.1200 thya cho nhau dc nhé bnaj nhung chay pm-unlock...........ok good

[hunggsm]

upp của 1200<2292> thay được cho 1202 nhưng upp của 1202<2293> không thay cho 1200 dc nha