Update Mcn-pro anh em vui lòng post ở đây

[TuấnPhát_GSM]

Mcnpro box ChinaRes Editor 1.24 released

* Add excel file convert to dict function (in Beta)
* Improved Font detection method
* Improved Font import function for stable
* Other small report bugs fixed

Upgrading from Previous Versions:

* Version of 1.24 is a maintenance release. (require install suite version 2.08 first) so we are recommend all customers running prior versions upgrade to last version be more stability! As usual, new version is available for all customers with valid, To download that from support section

[GIALAI_GSM]

Mcnpro Box official special version 3.1.1 Released
What's new for version 3.1.1 ? New!
Version 3.1.0 just for beta test. so did not release for public

• MTK Add 4 IMEIs direct change function
• MTK Add IMEI analysis /change direct from file
  [if you wanna direct change from file, you have input 15 digits in IMEI option]
• MTK Boot7 updated to support more falsh ICs
• Spreadtrum IMEI change function Improved
• Spreadtrum Separate button added for read phone general information
• Spreadtrum nv data backup function added for Nand flash
• Spreadtrum Nv data restore function added for Nand flash
• Spreadtrum 8800H/S boot improved to more stable
• Mstar Separate button added for read phone general information
• Mstar manually operation format function (Seems first in the world)
  [Format before Backup requested to be more safety]
• Infineon Separate button added for read phone general information
• Infineon manually operation format function (Seems first in the world)
  [Format before Backup requested to be more safety]
• Other small report bugs fixed

Upgrading from Previous Versions:

• Version of 3.1.1 request install Suite version 2.0.8 at first, so we are recommend all customers running prior versions upgrade to last version be more stability! As usual, new version is available for all customers with valid, To download that from support section

>>>>More detail please check at here!!


We are always the best box for chinese mobile, we are always did what customer needed ! no trick and always the truth!

More news coming with these last few days if ready...


Best regards !


Mcnbox

[GIALAI_GSM]

Mcnpro Box official version 3.1.2 Released
What's new for version 3.1.2 ? New!

• MTK 4 IMEIs direct Read/Write function at power on mode added (Seems first in the world)

Start Scanning...
->.
Results:
CPU: MT6253.
VCC:3,GND:1 9 12,RXD:7,TXD:6
[V:3 G:1 9 12 R:7 T:6] Apply to Box
Phone should be Switched on
Phone detected, wait...
Reading data...
Done, IMEI-1: 35511111111111-4
Phone should be Switched on
Phone detected, wait...
Reading data...
Done, IMEI-2: 35522222222222-7
Phone should be Switched on
Phone detected, wait...
Reading data...
Done, IMEI-3: 35533333333333-0
Phone should be Switched on
Phone detected, wait...
Reading data...
Done, IMEI-4: 35544444444444-3
Phone should be Switched on
Phone detected, wait...
SN to be changed...
Done, IMEI-1: 35555555555555-0
Phone should be Switched on
Phone detected, wait...
SN to be changed...
Done, IMEI-2: 35566666666666-3
Phone should be Switched on
Phone detected, wait...
SN to be changed...
Done, IMEI-3: 35577777777777-6
Phone should be Switched on
Phone detected, wait...
SN to be changed...
Done, IMEI-4: 35588888888888-9

• MTK IMEI change function bugs fixed from V3.1.1 (Thanks SCP Team Report)
• MTK Boot7 Improved to more stable
• MTK auto power for phone bugs fixed
• Spreadtrum file save bugs fixed
• Spreadtrum 8800H/S boot improved
• Spreadtrum nv data backup/Restore function improved
• Other small report bugs fixed

Upgrading from Previous Versions:

• Version of 3.1.2 request install Suite version 2.0.8 at first, so we are recommend all customers running prior versions upgrade to last version be more stability! As usual, new version is available for all customers with valid, To download that from support section

>>>> More information check here!!


Mcnpro Box always the best box for chinese mobile, we are always did what customer needed ! no trick and all the time are truth!


Best regards!

Mcnbox

[TuấnPhát_GSM]

What's new for version 3.1.3? New!

*Spreadtrum Nor flash 4 IMEIs direct change function added
*Spreadtrum 8800H/S boot improved to more fast
*Spreadtrum nv data backup/Restore bugs fixed
*MTK Boot6/7 Improved to more fast
*MTK 6252 full supported added
*Other small report bugs fixed

Upgrading from Previous Versions:

*Version of 3.1.3 request install Suite version 2.0.8 at first, so we are recommend all customers running prior versions upgrade to last version be more stability! As usual, new version is available for all customers with valid, To download that from support section

More detail check here!


Best regards !


Mcnbox

[GIALAI_GSM]

Mcnpro box ChinaRes Editor 1.25 released
Mcnpro box ChinaRes Editor 1.25 released New!

• Modify Excel convert to dict function
• MTK font detection method Improved (In beta)
• Modify MTK font import function to more stable
• MTK new CPU supported
• Other small report bugs fixed

Upgrading from Previous Versions:

• Version of 1.25 is a maintenance release. (require install suite version 2.08 first) so we are recommend all customers running prior versions upgrade to last version be more stability! As usual, new version is available for all customers with valid, To download that from support section

More detail check here!!


Best regards !


Mcnbox

[GIALAI_GSM]

Mcnpro Box official version 3.1.4 Released
What's new for version 3.1.4 ? New! Hot!

• Spreadtrum new flash ICs added
• Mstar automatic format function improved (Only we can do!)
• Virtual oscilloscope tools added
• Mcnpro box Firmware version upgrade to V1.11

Welcome to use McnBox!
 Selected COM5 
Baud setting ... 
Set Baud done Initialize in progress ...
 Checking data ... 
Serial No. MCN2011xxxxxxxx 
 Firmware V1.11 
Checksum 72DA-42BE Box Connected!
 Ready working at COM5

• Other small report bugs fixed

Upgrading from Previous Versions:

• Version of 3.1.4 request install Suite version 2.0.8 at first, so we are recommend all customers running prior versions upgrade to last version be more stability! As usual, new version is available for all customers with valid, To download that from support section

More information check at here !!!!


For Chinese mobile phone software ,We are still the best !!!!!


Best regards !


Mcnbox

[TuấnPhát_GSM]

What's new for version 3.1.5 ? New! Hot!

MTK Network unlock function added (Beta)
Spreadtrum new flash ICs added
Mstar automatic format function improved
Virtual oscilloscope tools improved, Now you can using Mcnpro adapter "+" "-" as a probe cable
Other small report bugs fixed

Upgrading from Previous Versions:

Version of 3.1.5 request install Suite version 2.0.8 at first, so we are recommend all customers running prior versions upgrade to last version be more stability! As usual, new version is available for all customers with valid, To download that from support section

More information check at here

The Best Chinese Mobile Phones Software Solution - Mcnpro Box

Best regards !

Mcnbox

[GIALAI_GSM]

Mcnpro Box official version 3.1.6 beta Released
What's new for version 3.1.6 beta ? New! Hot!

• MTK Network unlock function improved
• MTK 6236 Read/Write bugs fixed
• MTK 6235B "not find data" bugs fixed
• Other small report bugs fixed

Upgrading from Previous Versions:

• Version of 3.1.6 request install Suite version 2.0.8 at first, so we are recommend all customers running prior versions upgrade to last version be more stability! As usual, new version is available for all customers with valid, To download that from support section

Something new will be coming at next week !


Best regards !

Mcnbox

[TuấnPhát_GSM]

What's new for version 3.1.7 ? New!

MTK Pinout detect improved (MTK 6252 / 6236 etc)
Mcnpro box Firmware version upgrade to V1.12

Welcome to use McnBox!
Selected COM5
Baud setting ...
Set Baud done
Initialize in progress ...
Checking data ...
Serial No. MCN2011xxxxxxxx 
Firmware V1.12
Checksum 72DA-42BB
Box Connected!
Ready working at COM5

Other small report bugs fixed



Upgrading from Previous Versions:

Version of 3.1.7 request install Suite version 2.0.8 at first, so we are recommend all customers running prior versions upgrade to last version be more stability! As usual, new version is available for all customers with valid, To download that from support section

More detail check at here


Thinking about professional chinese mobile tools - Mcnpro Box, 3 years non stop free update.



Speical thanks gemini16 / tinhtit report bugs.


Best regards !


Mcnbox

[GIALAI_GSM]

Mcnpro Box Suite version 2.0.9 Released
Mcnpro Box Suite version 2.0.9 included:

• Mcnpro Box Official Main version 3.1.7 New!!
• Mcnpro Box ChinaRes Editor version 1.2.5 Free!!
• Mcnpro Box Virtual oscilloscope tools Free!!

- What's new for Mcnpro box version 3.1.7 ?

• MTK Pinout detect improved (MTK 6252 / 6236 etc)
• Mcnpro box Firmware version upgrade to V1.12
• Other small report bugs fixed

- ChinaRes Editor version 1.2.5 Free!!

Information check at Mcnpro Box related section

- Virtual oscilloscope tools Free!!

Upgrading from Previous Versions:

As usual, new version is available for all customers with valid, To download that from support section !

More information check at Mcnpro Box section>>>


No reason not to be with us


Best regards!


Mcnbox