Medusa Box Updates

[namnhatrang]

Medusa Box v.2.4.0 - more LG devices added for USB repair!

Medusa Box v.2.4.0 is out!

We have added boot repair via USB and small TP for:
LG D320, D320F, D320N, D380, D385, MS323,
which are detected by PC as "Qualcomm HS-USB QDloader 9008" device!

Also added repair via JTAG interface for:
LG C410, ZTE Z993, Samsung GT-B6520!

Medusa Box v.2.4.0 Release Notes:
- Added support for the following models:

• LG D320 - added Dead Boot Repair via USB
• LG D320F - added Dead Boot Repair via USB
• LG D320N - added Dead Boot Repair via USB
• LG D380 - added Dead Boot / Device Repair via USB
• LG D385 - added Dead Boot Repair via USB
• LG MS323 - added Dead Boot Repair via USB
• LG C410 - added Dead Boot / Device Repair
• ZTE Z993 - added Dead Boot Repair (thanks to Mr. Dr_Wolodya)
• Samsung GT-B6520 - added Dead Boot Repair (thanks to Mr. Dr_Wolodya)

- All pinouts and Repair procedures are described in the manual ("Help" button in Software).

To repair mentioned above devices via USB, please follow the next three steps:

1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
   (do NOT use any USB hubs!)
2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
   Drivers are in {Installation_Folder}\Driver\QHSUSB
3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

https://www.youtube.com/watch?v=hRG9NEUip_E



Medusa - Ultimate Breakthrough in the Phone Repair!


Download Medusa Box v.2.4.0

[namnhatrang]

Medusa Box v.2.4.1 is out!

We have added boot repair via USB and small TP for:
LG D370, D370TR, D373, D373EU, D375, D410, D410H, D410HN,
which are detected by PC as "Qualcomm HS-USB QDloader 9008" device!

Also added repair via JTAG interface for:
Huawei G510-0010 and Y301-A1 (MetroPCS)!

Medusa Box v.2.4.1 Release Notes:
- Added support for the following models:

• LG D370 - added Dead Boot Repair via USB
• LG D370TR - added Dead Boot Repair via USB
• LG D373 - added Dead Boot Repair via USB
• LG D373EU - added Dead Boot Repair via USB
• LG D375 - added Dead Boot Repair via USB
• LG D410 - added Dead Boot / Device Repair
• LG D410H - added Dead Boot Repair
• LG D410NH - added Dead Boot Repair
• Huawei G510-0010 - added Dead Boot Repair (thanks to Mr. Dr_Wolodya)
• Huawei Y301-A1 (MetroPCS) - added Dead Boot Repair (thanks to Mr. Dr_Wolodya)

- All pinouts and Repair procedures are described in the manual ("Help" button in Software).

To repair mentioned above devices via USB, please follow the next three steps:

1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
   (do NOT use any USB hubs!)
2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
   Drivers are in {Installation_Folder}\Driver\QHSUSB
3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

Medusa - Ultimate Breakthrough in the Phone Repair!

[YOUTUBEHD]kFkt8F_mjIY[/YOUTUBEHD]

Download Medusa Box v.2.4.1

[namnhatrang]

Medusa Box v.2.4.2 is out!

We have added boot repair via USB and small TP for:
LG D170, D175F, D180F, D400H, D400HN, D405, D405H, D405N, D405TR, D415, D724,
which are detected by PC as "Qualcomm HS-USB QDloader 9008" device!

Medusa Box v.2.4.2 Release Notes:
- Added support for the following models:

• LG D170 - added Dead Boot / Device Repair via USB
• LG D175F - added Dead Boot Repair via USB
• LG D180F - added Dead Boot Repair via USB
• LG D400H - added Dead Boot Repair via USB
• LG D400HN - added Dead Boot Repair via USB
• LG D405 - added Dead Boot Repair via USB
• LG D405H - added Dead Boot Repair via USB
• LG D405N - added Dead Boot Repair via USB
• LG D405TR - added Dead Boot Repair via USB
• LG D415 - added Dead Boot Repair via USB
• LG D724 - added Dead Boot / Device Repair via USB

- All pinouts and Repair procedures are described in the manual ("Help" button in Software).

To repair mentioned above devices via USB, please follow the next three steps:

1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
   (do NOT use any USB hubs!)
2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
   Drivers are in {Installation_Folder}\Driver\QHSUSB
3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

[YOUTUBEHD]zF9XMnpjveA[/YOUTUBEHD]

[YOUTUBEHD]lbqgFy4fbS0[/YOUTUBEHD]


Medusa - Ultimate Breakthrough in the Phone Repair!


Download Medusa Box v.2.4.2

[namnhatrang]

Medusa Box v.2.4.3 is out!


We have added boot repair via USB and small TP for:
LG E980, E980H, LG E985T, E986, LG E988, LG E989,
which are detected by PC as "Qualcomm HS-USB QDloader 9008" device!

Also added repair via JTAG interface for:
Gigabyte GSmart G1317D

Medusa Box v.2.4.3 Release Notes:

- Added support for the following models:

• LG E980 - added Dead Boot / Device Repair via USB
• LG E980H - added Dead Boot Repair via USB
• LG E985T - added Dead Boot Repair via USB
• LG E986 - added Dead Boot Repair via USB
• LG E988 - added Dead Boot Repair via USB
• LG E989 - added Dead Boot Repair via USB
• Gigabyte GSmart G1317D - added Dead Boot Repair (thanks to Mr. Dr_Wolodya).

- All pinouts and Repair procedures are described in the manual ("Help" button in Software).

To repair mentioned above devices via USB, please follow the next three steps:

1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
   (do NOT use any USB hubs!)
2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
   Drivers are in {Installation_Folder}\Driver\QHSUSB
3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

[YOUTUBEHD]v2gNk5Yoilc[/YOUTUBEHD]




Medusa - Ultimate Breakthrough in the Phone Repair!


Download Medusa Box v.2.4.3

[namnhatrang]

Medusa Box v.2.4.4 is out!

We have added boot repair via USB and small TP for:
LG D150, D157F, D160, D160F, D160G, which are detected by PC as "Qualcomm HS-USB QDloader 9008" device!

Also added repair via JTAG interface for:
Samsung SGH-T479B and ZTE V880G.

Medusa Box v.2.4.4 Release Notes:
- Added support for the following models:

• LG D150 - added Dead Boot / Device Repair via USB
• LG D157F - added Dead Boot Repair via USB
• LG D160 - added Dead Boot / Device Repair via USB
• LG D160F - added Dead Boot Repair via USB
• LG D160G - added Dead Boot Repair via USB
• Samsung SGH-T479B - added Dead Boot/Device Repair
• ZTE V880G - added Dead Boot Repair (thanks to Mr. Dr_Wolodya)

- All pinouts and Repair procedures are described in the manual ("Help" button in Software).

To repair mentioned above devices via USB, please follow the next three steps:

1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
   (do NOT use any USB hubs!)
2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
   Drivers are in {Installation_Folder}\Driver\QHSUSB
3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

[YOUTUBEHD]aqMfb3HOFe4[/YOUTUBEHD]

Medusa - Ultimate Breakthrough in the Phone Repair!


Download Medusa Box v.2.4.4

[namnhatrang]

Medusa Box v.2.4.5 is out!

We have added boot repair via USB and small TP for:
LG D280N, D280G, LG D285, D285F, D285G, D315, D315K, which are detected by PC as "Qualcomm HS-USB QDloader 9008" device!

Medusa Box v.2.4.5 Release Notes:

- Added support for the following models:

• LG D280N - added Dead Boot Repair via USB
• LG D280G - added Dead Boot Repair via USB
• LG D285 - added Dead Boot / Device Repair via USB
• LG D285F - added Dead Boot Repair via USB
• LG D285G - added Dead Boot Repair via USB
• LG D315 - added Dead Boot Repair via USB
• LG D315K - added Dead Boot / Device Repair via USB

- Added new Core ID (107180E1) for Qualcomm APQ8064
- All pinouts and Repair procedures are described in the manual ("Help" button in Software)

To repair mentioned above devices via USB, please follow the next three steps:

1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
   (do NOT use any USB hubs!)
2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
   Drivers are in {Installation_Folder}\Driver\QHSUSB
3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

[YOUTUBEHD]N0oePHlpcK4[/YOUTUBEHD]


[YOUTUBEHD]RF_gEqK-roo[/YOUTUBEHD]


Medusa - Ultimate Breakthrough in the Phone Repair!


Download Medusa Box v.2.4.5

[namnhatrang]

Medusa Box v.2.4.6 is out!

We have added boot repair via USB and small TP for:
LG D618, F240K, F240L, F240S and via JTAG for Samsung GT-S5302!

Medusa Box v.2.4.6 Release Notes:
- Added support for the following models:

• LG D618 - added Dead Boot/Device Repair via USB
• LG F240K - added Dead Boot Repair via USB
• LG F240L - added Dead Boot Repair via USB
• LG F240S - added Dead Boot Repair via USB
• Samsung GT-S5302 - added Dead Boot/Device Repair

- All pinouts and Repair procedures are described in the manual ("Help" button in Software)

To repair LG D618, F240K / L / S via USB, please follow the next three steps:

1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
   (do NOT use any USB hubs!)
2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
   Drivers are in {Installation_Folder}\Driver\QHSUSB
3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

Medusa - Ultimate Breakthrough in the Phone Repair!



[YOUTUBEHD]Gxmqa8KAJaw&[/YOUTUBEHD]



[YOUTUBEHD]syN0Jbx-f64&[/YOUTUBEHD]



Download Medusa Box v.2.4.6

[namnhatrang]

Medusa Box v.2.4.7 - LG F310L, L-04E USB repair and more!

Medusa Box v.2.4.7 is out!

We have added boot repair via USB and small TP for LG F310L and LG L-04E.
Also added Boot/Device Repair for Samsung GT-I9210T and HTC Desire (PB99210) via JTAG.

Medusa Box v.2.4.7 Release Notes:
- Added support for the following models:

• LG F310L - added Dead Boot Repair via USB
• LG L-04E - added Dead Boot Repair via USB
• Samsung GT-I9210T - added Dead Boot/Device Repair
• HTC Desire (PB99210) - added Dead Boot/Device Repair, Repair IMEI, Repair CID, Unlock (via Read Codes) (thanks to mr. mathew_di)

- Improved connect procedure for Dead Boot Repair via USB for the following devices:

• LG P710
• LG P712
• LG P713, P713GO, P713TR
• LG P714
• LG P715
• LG P716

- All pinouts and Repair procedures are described in the manual ("Help" button in Software)

To repair F310L and LG L-04E via USB, please follow the next three steps:

1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
   (do NOT use any USB hubs!)
2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
   Drivers are in {Installation_Folder}\Driver\QHSUSB
3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

Medusa - Ultimate Breakthrough in the Phone Repair!


[YOUTUBEHD]vQ10vZ3JU90[/YOUTUBEHD]


Download Medusa Box v.2.4.7

[namnhatrang]

Medusa Box v.2.4.8 - LG E960, F200x USB repair and more!

Medusa Box v.2.4.8 is out!

We have added boot repair via USB and small TP for LG E960, F200K, F200L, F200S, F200LS
and via JTAG for Samsung GT-B5512 and LG F200L.

Medusa Box v.2.4.8 Release Notes:
- Added support for the following models:

• LG E960 - added Dead Boot / Device Repair via USB
• LG F200K - added Dead Boot Repair via USB
• LG F200L - added Dead Boot Repair via USB / JTAG
• LG F200LS - added Dead Boot Repair via USB
• LG F200S - added Dead Boot Repair via USB
• Samsung GT-B5512 - added Dead Boot / Device Repair via JTAG

- All pinouts and Repair procedures are described in the manual ("Help" button in Software)

To repair mentioned above devices via USB, please follow the three next steps:

1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
   (do NOT use any USB hubs!)
2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
   Drivers are in {Installation_Folder}\Driver\QHSUSB
3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

Medusa - Ultimate Breakthrough in the Phone Repair!


Download Medusa Box v.2.4.8

[namnhatrang]

Medusa Box v.2.4.9 is out!

We have added boot repair via USB and small TP for LG G3 D851, G2 Mini LTE-A D620, LG D620K, LG D620R
and via JTAG for ViewSonic ViewPad 7 (VS13761).

Medusa Box v.2.4.9 Release Notes:
- Added support for the following models:

• LG D851 - added Dead Boot / Device Repair via USB
• LG D620 - added Dead Boot Repair via USB
• LG D620K - added Dead Boot Repair via USB
• LG D620R - added Dead Boot Repair via USB
• ViewSonic ViewPad 7 (VS13761) - added Dead Boot / Device Repair via JTAG (thanks to Mr. Dr_Wolodya)

- Uploaded new Full Flash and Repair files for ZTE MF100 (128MB) (thanks to Mr. Dr_Wolodya)
- All pinouts and Repair procedures are described in the manual ("Help" button in Software)

To repair mentioned above devices via USB, please follow the three next steps:

1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
   (do NOT use any USB hubs!)
2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
   Drivers are in {Installation_Folder}\Driver\QHSUSB
3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

[YOUTUBEHD]aA0BNYhYEoc[/YOUTUBEHD]

Medusa - Ultimate Breakthrough in the Phone Repair!


Download Medusa Box v.2.4.9