Support Phone models

[saigonmobile]

Software discription:
Direct unlock all FW version
Restore lock
Support new Thomson and Micron B2 flash chip
Change all service settings in all BF3 and BF4 (contrast, LCD type ... complete list over 800 items)
Support change of Phone Logos
SAFE read and write
Read/Write full flash
Read/Write flash driver
Read/Write Zi (like T9)
Read and write language packs - latin and complex
Write repair flash
Upgrade or downgrade firmware of BF3 to 311 v101, v102, v103 (includes games) or to v104
Clone any BF3 with Latin flash - to Complex flash - v101 or v102
Clone any BF3 with Complex flash - to Latin flash - v101, v102 or v103
Upgrade firmware of any BF4 to 10E or 10R (or downgrade)
Clone any BF4 with Latin flash - to Complex flash OR with Complex flash - to Latin flash
Clone any BE4/5 with Latin flash - to Complex flash
Clone any BE4/5 with Complex flash - to Latin flash
Repair "WARNING SOS CALLS ONLY" of BF3 and BF4
Calculate and repair checksums of flash
Easy change LCD Type
Show IMEI

Rebuild IMEI

Show operator info

Show lang pack info

Inform about lang pack type - complex or latin

Repair dead phones (for 100% working phone u need original TEH zone)

Block read and write (any area from begin to end of flash)


Alcatel OT320 service tool ( name: Alct_OT320 - latest version: 1.0 ):

Supported models list ( by this tool ): Supported models photo:


Alcatel: OT320


Software screenshots:

Software discription:
Read/Write flash
Read all codes
Repair IMEI


JTAG service tool ( name: MultiJTAGtool - latest version: 1.2 ):

Supported models list ( by this tool ): Supported models photo:


Panasonic: GD35, GD52, GD67, GD90, GD92, GD92c, GD93, GD95, GD95c, GD96


Software screenshots:

Software discription:
BOOT RESTORE options. We would like to present it - First in the world BOX which can make boot restoring in dead Panasonic phones. Now you can restore all Panasonic GD series. ( new update with new Panasonic line will comming soon... )
Cloning Panasonic GD93


LG2G service tool ( name: LG2G_tool - latest version: 1.34 ):

Supported models list ( by this tool ): Supported models photo:


LG: c1100, c1200, c1300, c1400, c2100, c2200, c3100, c3300, c3310, c3320, c3400, F2100, F2200, F2250, F2300, F2400, F2410, F7100, G1500, G1600, G1610, G3000, ( G3100, G4015, G5300, G5300i, G5400, G5500, G5600, G7000, G7020, G7030, G7050, G7070, G7100, L1100, L3100, L1150, W3000, W7000, B2000, B2050, B2100, B2250, A7100, A7150, M4410, MG105, L341i, L342i, L343i, G622, G632, G672, G822, 510, 510w, 1200, 7020, 1300, 520, 7010, G510, B2070, B2150, C1150, C3380, F7200, F9100, KG210, KG220, KG225, KG245, KG248, C1300i, S5000, C3600, F3000, KG320, KG800, KG90, P7200, S5100, S5200, L5100, T5100, M6100, KG920, KG810, KG98, KG110, KG118, KG119, F1200, F1200 (RSA), KG110, KG118, KG119, KG240, KG810 (RSA), KG98 (RSA), KG120, KG228, KG230, KG238, KG328, KG330(RSA), KG338(RSA), KG928, MG810, MG110, MG220, MG120, MG320, ME500, ME540, MG210, MG100, MG800, G635, G688, G828, G932, G933, G210, G220, G232, G233, G259, G262, G263, G5408, G610, G677, G682, LG810, LG8390


Software screenshots:

Software discription:
read phone info
direct unlock (or read NCK)
restore backup
read and write full flash
read and write calibration data
write original flash
change firmware and languages
fast read and write up to 921kb
restore IMEI
calculate NCK by IMEI : 510, 510W, G510, 1200, 1300, 7010, 7020, W3000
support RSA protected phones
more than 100 models are supported


LG3G service tool ( name: LG3G_tool - latest version: 1.1 ):

Supported models list ( by this tool ): Supported models photo:


LG: U8100, U8110, U8120, U8130, U8138


Software screenshots:

Software discription:
direct unlock

relock to any operator

repair lock
change firmware version
repair phone after bad unlocking or flashing


Mitsubishi service tool ( name: MitsubishiTool - latest version: 1.12 ):

Supported models list ( by this tool ): Supported models photo:


Mitsubishi: Astral, Galaxy, Geo, Laser, Luna, Geo @, ARIA, Geo GPRS, Mars, Neptune, Aura, Mystral, Eclipse, T110, 110m, m320, m21i, m222i, m330, m341, m342, m350, L6i, m720, m420, m430


Software screenshots:

Software discription:
support read/write flash and eeprom
support read and repair lock codes
support repair IMEI


Motorola MPX200 service tool ( name: Mpx200_Multibox - latest version: 1.0 ):

Supported models list ( by this tool ): Supported models photo:


Motorola: MPX200


Software screenshots:

Software discription:
Direct unlock


Motorola W220 service tool ( name: MOTO_W220_Tool - latest version: 1.0 ):

Supported models list ( by this tool ): Supported models photo:


Motorola: W220

Software screenshots:

Software discription:
Unlock ( supported versions:
1030-000
109A-000
1120-000
1130-000
117A-000 )


MTK based service tool ( name: MTKCST_tool latest version: 2.1 ):

Supported models list ( by this tool ): Supported models photo:


CECT: G2, G6, GM128, GM308m, GM329, GM896, E760i, K848, Q300, U8800
Chiva: V888
Fly: MX300, 2040, 2040i
Kijian: K28, K800i, K88, K7700
Lenovo: L816
Others: n70i, v333, ev500, w800i, K750, n3250

Software screenshots:

Software discription:
Auto Calibration Backup ( this is automatic backup which you will get when you connect a phone. All readed backups saves in the folder "Backup" with name which contain phone IMEI, date and time ).
Init Phone After Process ( after flashing software automaticly starts Phone Init. This is same if you will press after flashing "Do Selected Jobs" ).
Keep Calibration data ( This is VERY important function. After flashing software autmoticaly save this data, which were saved with first connect into your phone. You will never loose now phone settings). Calibration data contains - frequensy settings, battery settings, LCD, sound.
Phone Lock ( you can unlock your phone now, after unlocking code will be 1122 and your phone will be unlcoked ).
IMEI ( You can change IMEI )
Version ( You can change also )
Branch
Barcode
Restore Calibration Data ( for restoring your calibration data from previoce backup ).
This utility is unique because it will support all the Chinese brands no metter what name they have. The only thing you should know brand, phone model and type of flash but we plan to make autodetection of all this things.

[saigonmobile]

Nokia: DCT4, WD2, BB5

Software screenshots:


Software discription:
Attach Phone - connecting phone, phone must be in local or test mode.
Check Flashing Bus - only for MultiBox users - checking flushing bus.
Automatic Code Calculation - after connecting phone it generates mastercode to unlock phone (simlock).
Automatic Flash Area RPL - after connecting phone it makes backup of IMEI (from flash) - so after wrong attempt of flash when IMEI is ???????????????, it can be repaired simply by upload saved RPL backup.
Autobackup MCUSW CRC - makes backup MCU SW CRC - checksum backup, this feature help you to repair the phone in case after wrong flashing or uploading wrong PM there is error message CONTACT SERVICE.
Automatic MASTERCODE Calculation - generates Mastercode to reset phone code.
Read PM - phone memory dump.
Write PM - phone memory restore.
Skip Gallery - it allowes to skip gallery during read/write process (saves lot of time).
Wr Security - setup manula phone code (default: 12345)
CDMA Security - check this for CDMA phone maintenance
Read PP - read PP matrix - customization of the phone - it can activate for example hidden menu or 2 lines.
Write PP - store PP matrix
Lifetimer reset - there is an option in phone (DCT4/WD2/TIKU/BB5) menu after you code *#92702869# you can see timer of conversation, you can reset it using this function.
Wr HWID - store HWID to phone, store version of PCB, LCD and other componets of handset.
Wr Product Code - product code restore.
Wr Basic P. Code - basic code restore.
Wr Production S/N - serial number restore (manufacture s/n).
Wr Module Code
Diagnose IMEI - if IMEI is corrupted it helps to diagnose if corruption is in flash (it can be programmable repaired) or in UEM (repairing is only after changing UEM chip).
Factory Defaults - restore default parameters of phone.
Format User Area - formatting Symbian OS (if it`s installed in the phone)
Phone mode: Normal, Local, Test - switch phone to choosen mode
Vibra On/Off - testing vibration motor in the phone.
LCD Pattern Test - testing LCD (dead pixels, etc...).
Backlight Tests - backlight of keyboard and LCD tests.
BASEBAND SELFTESTS - self test of the phone:
- CBUS interface
- tempterature of power amplifier
- camera interface
- irda interface
- bluetooth interface
- checksum control of software
- test of MBUS interface
- RAM test
- spare battery test
- test of keyboard lock
- simlock test
- other
operation takes 15 - 30 seconds, PASSED - ok, FAILED - not ok, SHORT CIRCUITER in case of spare battery means all ok, so you can easly find the couse of hanging on the phone or Contact Service
Keyboard Burn-In Tests - testing keyboard.
Restore IMEI TO OTP - after repairing of the phone and uploading PM IMEI it`s chaning to incorrect, you can rebuild it with one click.
Recovery - corrupted Warranty data can be recovered, corrupted Warranty will couse that phone is showing Contact service, for 6230/6230i (after flashing IMEI change to 00000000000000) - then warrant is lost, KarwosGSM first in the world found solution to this problem.
IMEI, PRODUCTION DATE, PURCHASE DATE, REPAIR DATE - change all this parameters.
Read Status - read status, power on/off, name of device.
Enable BT - power on BT.
Disable BT - power off BT.
Change BT_ID - change name of Bluetooth
t can make a backup of phone, it can be easly uploaded in the future. It can store:
calibration of antenna signal
manufacture data
warranty
calibration of keyboard
other critica data
phone code
phone book
T9 customization
WAP/MMS/GPRS, Zakładki WAP settings
interface settings
profile settings
simlock
wallet
gallery
bluetooth calibration
FLASH IMEI RPL
Reading gallery contents - ringtone, java applets, backgroud pictures, it can also delete objects.
Can read from phone following information:
- battery settings
- charging voltage
- temperature of microcontrollers
- battery capacity
- battery temperature
- keyboard resistance
- light sensor voltage
- other
Audio Tests - buzzer and speaker tests, it can send testing signal for this devices, it`s needed for repairing this parts.
Microphone Gain - store gain of microfone - becarefull when usint this.


Motorola ODM / Compal service tool ( name: Moto_odm - latest version: 1.1 ):

Supported models list ( by this tool ): Supported models photo:


Motorola: c115, c116, c117, c118, c139, c155, c156, c157, c257, c261, v170, v171, v172, v175, v176, v177


Software screenshots:

Software discription:
Read/ Write Flash, FFS, EEprom. (Bin format)
Flash Original flash files : *.m0, *.mot
Read Sub Codes, erase FFS.
Direct unlock


Panasonic VSx service tool ( name: PVSST_Multibox - latest version: 1.1 ):

Supported models list ( by this tool ): Supported models photo:


Panasonic: VS2, VS3, VS6, VS7, MX6, MX7, SA6, SA7, A10x, X300, GD55, G5x/G70, SC3


Software screenshots:

Software discription:
read unlock codes, erase sec library, read full back up - on Panasonic: X60, X66, X400, VS2, VS3, VS6, VS7, MX6, MX7, SA6, SA7


Philips S-series service tool ( name: SPHST_MultiBOX - latest version: 2.1 ):

Supported models list ( by this tool ): Supported models photo:


Philips: S200, S220, S660, S800, S880, S890, 390


Software screenshots:

Software discription:
Auto Calibration Backup ( this is automatic backup which you will get when you connect a phone. All readed backups saves in the folder "Backup" with name which contain phone IMEI, date and time ).
Init Phone After Process ( after flashing software automaticly starts Phone Init. This is same if you will press after flashing "Do Selected Jobs" ).
Keep Calibration data ( This is VERY important function. After flashing software autmoticaly save this data, which were saved with first connect into your phone. You will never loose now phone settings). Calibration data contains - frequensy settings, battery settings, LCD, sound.
Phone Lock ( you can unlock your phone now, after unlocking code will be 1122 and your phone will be unlcoked ).
IMEI ( You can change IMEI )
Version ( You can change also )
Branch
Barcode
Restore Calibration Data ( for restoring your calibration data from previoce backup ).


Power calculator tool ( name: Power_calc - latest version: 1.3 ):

[saigonmobile]

Supported models list ( by this tool ): Supported models photo:


Philips: 568
Panasonic: A10x, x300, GD55, G5x/G70, SC3
NEC: 101, 342i, 343i
Siemens: ST55, ST60, CL50, CL75
Toshiba: TS10


Software screenshots:

Software discription:
generate Unlock codes via IMEI
generate reset codes via IMEI
supports all version
generate Repair code


Spice service tool ( name: SPHST_MultiBOX - latest version: 1.0 ):

Supported models list ( by this tool ): Supported models photo:


Spice S5, S8, S400, S404, S410, S450, S530, S555, S600, S640, S800, S900


Software screenshots:

Software discription:
Auto Calibration Backup ( this is automatic backup which you will get when you connect a phone. All readed backups saves in the folder "Backup" with name which contain phone IMEI, date and time ).
Init Phone After Process ( after flashing software automaticly starts Phone Init. This is same if you will press after flashing "Do Selected Jobs" ).
Keep Calibration data ( This is VERY important function. After flashing software autmoticaly save this data, which were saved with first connect into your phone. You will never loose now phone settings). Calibration data contains - frequensy settings, battery settings, LCD, sound.
Phone Lock ( you can unlock your phone now, after unlocking code will be 1122 and your phone will be unlcoked ).
IMEI ( You can change IMEI )
Version ( You can change also )
Branch
Barcode
Restore Calibration Data ( for restoring your calibration data from previoce backup ).


Samsung Agere service tool ( name: SAST_AGERE_MultiBOX - latest version: 1.1 ):

Supported models list ( by this tool ): Supported models photo:


Samsung: C200, C210, D100, D108, D410, D418, D720, D730, D800, D820, E105, E300, E300F, E310, E318, E400, E418, E530, E600, E600, E600C, E600F, E610, E620, E710, E715, P100, P400, P500, Q100, Q105, Q200, Q208, S100, S105, S108, S200, S300, V100, V200, V205, V206, X400, X480, X660, X710, X460


Software screenshots:

Software discription:
read user code
read phone code
read sim locks
read counter reset code
mms reset
change IMEI
reset to default settings
relock to other providers
media reset
NVM full reset
custom reset
WAP reset
JAVA reset


Samsung Swift service tool ( name: SAST_SWIFT_MultiBOX - latest version: 1.1 ):

Supported models list ( by this tool ): Supported models photo:


Samsung: D500, D500e, D508, D600, D600e, E340, E340e, E350, E350e, E358, E360, E730, E738, E750, E760


Software screenshots:

Software discription:
read user code
read phone code
read sim locks
read counter reset code
read flash buckup ( for update )
change IMEI
reset to default settings
relock to other providers


Samsung Z-series service tool ( name: SAST_ZXXX_MultiBOX - latest version: 1.3 ):

Supported models list ( by this tool ): Supported models photo:


Samsung: Z100, Z105, Z107, Z110, Z140, Z500, ZV10, ZV30, Z300


Software screenshots:

Software discription:
Direct unlock,
reset user code,
flashing,
full repair after wrong unlock or flashing


TCL service tool ( name: TCL_tool - latest version: 1.0 ):

Supported models list ( by this tool ): Supported models photo:


TCL: U80

Software screenshots:

Software discription:
Read/Write unlock/reset codes
Read/Write lang pack
Read/Write full flash image
Direct unlock
Restore after bad unlock


VK service tool ( name: VK_tool - latest version: 1.0 ):

Supported models list ( by this tool ): Supported models photo:


VK: 200


Software screenshots:

Software discription:
safe unlock in just 15 seconds including security backup
read flash and language pack
write flash and language pack
backup security area
no need use phone with battery during unlocking process
no need power on phone for unlocking, just plug in cable, install driver and press unlock button on sofware


UNIVERSAL BOX functions


Supported models:
UniBox supports unlocking, flashing, software repairing for the following phone models: Alcatel, Benq, Bosch, Ericsson, LG, Mitsubishi, Motorola, Nec, Panasonic, Samsung, Sagem, Sharp, Siemens, Sony, Toshiba, VK and many others. Totaly supports over 1200 different models.

NOTICE: We are not responsible for support of all those phones via Unibox functions. It means that you should use software which you can find for free. No any software or updates from us for all those models