Nokia: DCT4, WD2, BB5

Software screenshots:


Software discription:
Attach Phone - connecting phone, phone must be in local or test mode.
Check Flashing Bus - only for MultiBox users - checking flushing bus.
Automatic Code Calculation - after connecting phone it generates mastercode to unlock phone (simlock).
Automatic Flash Area RPL - after connecting phone it makes backup of IMEI (from flash) - so after wrong attempt of flash when IMEI is ???????????????, it can be repaired simply by upload saved RPL backup.
Autobackup MCUSW CRC - makes backup MCU SW CRC - checksum backup, this feature help you to repair the phone in case after wrong flashing or uploading wrong PM there is error message CONTACT SERVICE.
Automatic MASTERCODE Calculation - generates Mastercode to reset phone code.
Read PM - phone memory dump.
Write PM - phone memory restore.
Skip Gallery - it allowes to skip gallery during read/write process (saves lot of time).
Wr Security - setup manula phone code (default: 12345)
CDMA Security - check this for CDMA phone maintenance
Read PP - read PP matrix - customization of the phone - it can activate for example hidden menu or 2 lines.
Write PP - store PP matrix
Lifetimer reset - there is an option in phone (DCT4/WD2/TIKU/BB5) menu after you code *#92702869# you can see timer of conversation, you can reset it using this function.
Wr HWID - store HWID to phone, store version of PCB, LCD and other componets of handset.
Wr Product Code - product code restore.
Wr Basic P. Code - basic code restore.
Wr Production S/N - serial number restore (manufacture s/n).
Wr Module Code
Diagnose IMEI - if IMEI is corrupted it helps to diagnose if corruption is in flash (it can be programmable repaired) or in UEM (repairing is only after changing UEM chip).
Factory Defaults - restore default parameters of phone.
Format User Area - formatting Symbian OS (if it`s installed in the phone)
Phone mode: Normal, Local, Test - switch phone to choosen mode
Vibra On/Off - testing vibration motor in the phone.
LCD Pattern Test - testing LCD (dead pixels, etc...).
Backlight Tests - backlight of keyboard and LCD tests.
BASEBAND SELFTESTS - self test of the phone:
- CBUS interface
- tempterature of power amplifier
- camera interface
- irda interface
- bluetooth interface
- checksum control of software
- test of MBUS interface
- RAM test
- spare battery test
- test of keyboard lock
- simlock test
- other
operation takes 15 - 30 seconds, PASSED - ok, FAILED - not ok, SHORT CIRCUITER in case of spare battery means all ok, so you can easly find the couse of hanging on the phone or Contact Service
Keyboard Burn-In Tests - testing keyboard.
Restore IMEI TO OTP - after repairing of the phone and uploading PM IMEI it`s chaning to incorrect, you can rebuild it with one click.
Recovery - corrupted Warranty data can be recovered, corrupted Warranty will couse that phone is showing Contact service, for 6230/6230i (after flashing IMEI change to 00000000000000) - then warrant is lost, KarwosGSM first in the world found solution to this problem.
IMEI, PRODUCTION DATE, PURCHASE DATE, REPAIR DATE - change all this parameters.
Read Status - read status, power on/off, name of device.
Enable BT - power on BT.
Disable BT - power off BT.
Change BT_ID - change name of Bluetooth
t can make a backup of phone, it can be easly uploaded in the future. It can store:
calibration of antenna signal
manufacture data
warranty
calibration of keyboard
other critica data
phone code
phone book
T9 customization
WAP/MMS/GPRS, Zakładki WAP settings
interface settings
profile settings
simlock
wallet
gallery
bluetooth calibration
FLASH IMEI RPL
Reading gallery contents - ringtone, java applets, backgroud pictures, it can also delete objects.
Can read from phone following information:
- battery settings
- charging voltage
- temperature of microcontrollers
- battery capacity
- battery temperature
- keyboard resistance
- light sensor voltage
- other
Audio Tests - buzzer and speaker tests, it can send testing signal for this devices, it`s needed for repairing this parts.
Microphone Gain - store gain of microfone - becarefull when usint this.


Motorola ODM / Compal service tool ( name: Moto_odm - latest version: 1.1 ):

Supported models list ( by this tool ): Supported models photo:


Motorola: c115, c116, c117, c118, c139, c155, c156, c157, c257, c261, v170, v171, v172, v175, v176, v177


Software screenshots:

Software discription:
Read/ Write Flash, FFS, EEprom. (Bin format)
Flash Original flash files : *.m0, *.mot
Read Sub Codes, erase FFS.
Direct unlock


Panasonic VSx service tool ( name: PVSST_Multibox - latest version: 1.1 ):

Supported models list ( by this tool ): Supported models photo:


Panasonic: VS2, VS3, VS6, VS7, MX6, MX7, SA6, SA7, A10x, X300, GD55, G5x/G70, SC3


Software screenshots:

Software discription:
read unlock codes, erase sec library, read full back up - on Panasonic: X60, X66, X400, VS2, VS3, VS6, VS7, MX6, MX7, SA6, SA7


Philips S-series service tool ( name: SPHST_MultiBOX - latest version: 2.1 ):

Supported models list ( by this tool ): Supported models photo:


Philips: S200, S220, S660, S800, S880, S890, 390


Software screenshots:

Software discription:
Auto Calibration Backup ( this is automatic backup which you will get when you connect a phone. All readed backups saves in the folder "Backup" with name which contain phone IMEI, date and time ).
Init Phone After Process ( after flashing software automaticly starts Phone Init. This is same if you will press after flashing "Do Selected Jobs" ).
Keep Calibration data ( This is VERY important function. After flashing software autmoticaly save this data, which were saved with first connect into your phone. You will never loose now phone settings). Calibration data contains - frequensy settings, battery settings, LCD, sound.
Phone Lock ( you can unlock your phone now, after unlocking code will be 1122 and your phone will be unlcoked ).
IMEI ( You can change IMEI )
Version ( You can change also )
Branch
Barcode
Restore Calibration Data ( for restoring your calibration data from previoce backup ).


Power calculator tool ( name: Power_calc - latest version: 1.3 ):