Octoplus Box JTAG new update!

[namnhatrang]

Octoplus JTAG PRO v.1.2.3 - FRP reset via eMMC and more!




Octoplus JTAG PRO Software v.1.2.3 is out!

Released new Box firmware v.1.14, Reset FRP for Qualcomm-based devices, Software improvements and fixes.

Octoplus Box JTAG PRO Software v.1.2.3 Release Notes:

🐙 Added Reset FRP lock («Reset FRP» button at «Factory repair» tab in Software) for Qualcomm-based devices. With this option you can Reset FRP via eMMC connection

🐙 Released Box firmware v.1.14. In this firmware version fixed Read/Write operations for Hynix and old Samsung eMMC flash chips. Also improved connection procedure for 4-bit Bus Mode and improved stability

🐙 Improved Erase operation (now even more faster) while erasing selected partition(s)

🐙 Improvements in «Partition Manager»:

• Added Status Bar (Speed, Progress, ETA)
• Fixed error with saving selected partitions as «*.mpt»

🐙 Some GUI changes

🐙 All pinouts and Repair procedures are described in Software manuals ("Help" button in Software)

Note! After repairing box firmware you shouldn’t use previous versions of Octoplus Box JTAG PRO Software, please always use the latest actual software version.


Download Octoplus JTAG PRO Software v.1.2.3

[namnhatrang]

[namnhatrang]

Octoplus JTAG PRO v.1.2.6 is out!



[/URL]

Octoplus JTAG PRO Software v.1.2.6 is out!

We released support for "Qualcomm MSM8x26" cores, added eMMC write verification, added support via USB for LG H962, K420N, D290N and support for Samsung SM-J700H, LG D290N, Huawei G526-L11 via eMMC.

Octoplus Box JTAG PRO Software v.1.2.6 Release Notes:

🐙 Released support for "Qualcomm MSM8x26" cores (new USB loader added). Read/Write/Full Erase operations are supported.

🐙 Added support for the following models via USB:

• LG H962 - Read/Write/Erase Full, Easy Repair, Partition Manager, Constructor for Repair Files.
• LG K420N - Read/Write/Erase Full, Easy Repair, Partition Manager, Constructor for Repair Files.
• LG D290N - Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files.
• LG D380* - Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files.

🐙 Added support for the following models via eMMC:

• LG D290N - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files.
• Samsung SM-J700H - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files.
• Huawei G526-L11 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files.

🐙 All pinouts and Repair procedures described in the manual ("Help" button in the software).

* This device is already supported via USB in old Medusa Software, it is just revised and added to Medusa Pro Software.


[INDENT][INDENT]Download Octoplus JTAG PRO Software v.1.2.6

[namnhatrang]

Octoplus JTAG PRO v.1.2.6 is out! 🐙


Octoplus JTAG PRO Software v.1.2.6 is out!

We released support for "Qualcomm MSM8x26" cores, added eMMC write verification, added support via USB for LG H962, K420N, D290N and support for Samsung SM-J700H, LG D290N, Huawei G526-L11 via eMMC.

Octoplus Box JTAG PRO Software v.1.2.6 Release Notes:
🐙 Released support for "Qualcomm MSM8x26" cores (new USB loader added). Read/Write/Full Erase operations are supported.
🐙 Added support for the following models via USB:
LG H962 - Read/Write/Erase Full, Easy Repair, Partition Manager, Constructor for Repair Files.
LG K420N - Read/Write/Erase Full, Easy Repair, Partition Manager, Constructor for Repair Files.
LG D290N - Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files.
LG D380* - Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files.
🐙 Added support for the following models via eMMC:
LG D290N - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files.
Samsung SM-J700H - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files.
Huawei G526-L11 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files.
🐙 All pinouts and Repair procedures described in the manual ("Help" button in the software).
* This device is already supported via USB in old Medusa Software, it is just revised and added to Medusa Pro Software.



Download Octoplus JTAG PRO Software v.1.2.6

[namnhatrang]

Octoplus JTAG PRO v.1.2.7 is out!





Octoplus JTAG PRO Software v.1.2.7 is out!

Uploaded “Live logs” for most supported devices in to the Support Area.
Added support via USB for Lenovo S856, Huawei G6-L11, Huawei G620-A2 and
support for Samsung SM-J500H, LG H788, LG H343 via eMMC.

Octoplus Box JTAG PRO Software v.1.2.7 Release Notes:

🐙 Added support for the following models via USB:

• Lenovo S856 - added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• Huawei G6-L11 - added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• Huawei G620-A2 - added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files

🐙 Added support for the following models via eMMC:

• Samsung SM-J500H - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• LG H788 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• LG H343 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files

🐙 Uploaded “Live logs” (software logs with the information about correct device data connection) for most supported devices in to the Support Area. “Live logs” will be useful for checking correctness of your device connection - just compare log of connection operation of your device with “Live log” from the Support Area.

🐙 Added more detailed operations’ logging

🐙 All pinouts and Repair procedures described in the manual ("Help" button in the software)

Download Octoplus JTAG PRO Software v.1.2.7

[namnhatrang]

Octoplus JTAG PRO Software v.1.2.8 is out!




Octoplus JTAG PRO Software v.1.2.8 is out!

Added support via USB for LG D390N, LG H525N, LG VS986W and
support for Samsung SM-T310, LG D390N, LG H410 and LG P895 via eMMC.
Uploaded new “Live logs” into the Support Area.

Octoplus Box JTAG PRO Software v.1.2.8 Release Notes:

🐙 Added support for the following models via USB:

• LG D390N - added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• LG H525N - added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• LG VS986W - added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files

🐙 Added support for the following models via eMMC:

• Samsung SM-T310 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• LG D390N - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• LG H410 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• LG P895 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files

🐙 New features and improvements in «Content Extractor»:

• Added view of deleted data in contacts and SMS DBs ("Show unallocated data" button)
• Improved media files recognition in supported FS

🐙 Uploaded new “Live logs” into the Support Area

🐙 All pinouts and repair procedures described in the manual ("Help" button in the software)

Download Octoplus JTAG PRO Software v.1.2.8

[namnhatrang]

[INDENT]Octoplus JTAG PRO Software v.1.3.4 is out!

Added Factory Repair (Boot) for Sony devices.

Added support for Samsung SM-A500FU, Samsung SM-J700F, Huawei G630-U10, Sony D2303, Sony D5503, Sony D6603 via eMMC and support for OPPO A31 via USB.

Added possibility to set extended options for boot operation mode.

Uploaded new “Live logs” in to the Support Area.

Octoplus JTAG PRO Software v.1.3.4 Release Notes:

• Sony Factory Repair feature has been released!

You can try to repair boot on Sony devices via eMMC by using original Sony firmware («*.ftf» and "*.SIN_FILE_SET" versions of firmware are supported)
This feature can be useful in case, if you don’t have the same working device to prepare Boot Repair file or device you want to repair currently is not supported.
Note, device should have non-damaged native TA (Trim Area), otherwise device will not be repaired. We recommended to make backup of TA before repairing.
Also, software will automatically try to detect and backup (read) TA partition from the phone to «Backup» folder before repairing.

• Added support for the following models via eMMC:

• Samsung SM-A500FU – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• Samsung SM-J700F – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• Huawei G630-U10 – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• Sony D2303 – added Read/Write/Erase, Easy Repair *, Partition Manager, Constructor for Repair Files
• Sony D5503 – added Read/Write/Erase, Easy Repair *, Partition Manager, Constructor for Repair Files
• Sony D6603 – added Read/Write/Erase, Easy Repair *, Partition Manager, Constructor for Repair Files

• Added support for the following models via USB:

• OPPO A31 – added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files

• Added possibility to set extended options for boot operation mode.
  From now on you can set the following options: «Boot partition enable», «Boot ACK», «Boot bus width», «Reset boot bus conditions» and «Boot mode»

• Box firmware has been updated to 1.16 version! In 1.16 firmware version we have improved eMMC connection and eMMC Read operations

To update firmware automatically, it is necessary to connect the Box and only then run the software.
Also, you can update Box firmware manually via «Update Box Firmware» button at the «Welcome» tab in Octoplus JTAG Pro software

• Octoplus card firmware has been updated to 2.5 version! To run Octoplus JTAG Pro Software v.1.3.4 and future versions, it is necessary to update card firmware.
  Also note, that after updating card firmware to v.2.5, it won’t be possible to run older Software versions

• Uploaded Full flash for Huawei G620S-L01 into the Support Area

• Uploaded new “Live logs” into the Support Area

• Added more detailed operations’ logging

• Improved work (parsing) with pit files

• All pinouts and Repair procedures described in the manual ("Help" button in the software)

* Note: device should have non-damaged native TA; otherwise device will not be repaired





Octoplus/Octopus Shell Software v1.1.9 is out!

Octoplus/Octopus Shell Software v1.1.9 Release Notes:[INDENT]

1. Added smart-card latest firmware compatibility
2. Minor fixes

[INDENT]Download Octoplus JTAG PRO Software v.1.3.4

[namnhatrang]

Octoplus JTAG PRO Software v.1.3.5 is out!

Added support for Asus Nexus 7 (ME571K), Asus ZenFone 5 (T00F), Asus ZenFone 5 (T00P KL), Asus Memo Pad 7 (K01A), Asus FonePad (K012),
Nokia XL Dual Sim (RM-1030), Nokia Lumia 635 (RM-975), Samsung Galaxy Win Pro SM-G3812, Samsung Galaxy E5 SM-E500H via eMMC and support for LG US991 and Asus ZenFone 2 (Z00LD) via USB.

Released support for "Qualcomm MSM8939" core (general QC USB loader added). Read/Write/Full Erase operations are supported.

Uploaded new “Live logs” in to the Support Area..

Octoplus JTAG PRO Software v.1.3.5 Release Notes:

������ Added support for the following models via eMMC:

• Asus Nexus 7 (ME571K) – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• Asus ZenFone 5 (T00F) – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• Asus ZenFone 5 (T00P KL) – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• Asus Memo Pad 7 (K01A) – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• Asus FonePad (K012) – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• Nokia XL Dual Sim (RM-1030) – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• Nokia Lumia 635 (RM-975) – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• Samsung SM-G3812 – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. khurram136)
• Samsung SM-E500H – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files

Added support for the following models via USB:

• LG US991 – added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• Asus ZenFone 2 (Z00LD) – added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files

Released support for "Qualcomm MSM8939" core (general QC USB loader added). Read/Write/Full Erase operations are supported

Uploaded new “Live logs” in to the Support Area

Made improvements in Help and Pinout viewer

All pinouts and Repair procedures described in the manual ("Help" button in the software)

Download Octoplus JTAG PRO Software v.1.3.5

Find out more at: www.octoplusbox.com

[namnhatrang]

[namnhatrang]

Octoplus JTAG PRO v.1.3.6 is out! 🐙

Octoplus JTAG PRO Software v.1.3.6 is out!

Added support via eMMC (ISP) for HTC Desire Eye M910n, HTC One DS (PN07710), HTC Desire 626 (OPM9120), HTC Desire 510 (OPCV200), Samsung SM-J500FN, Samsung GT-I9505, LG LS665 and HUAWEI Ascend Mate 7 (MT7-L09).

Uploaded new “Live logs” in to the Support Area.

Octoplus JTAG PRO Software v.1.3.6 Release Notes:

🐙 Added support for the following models via eMMC:

• HTC Desire Eye (M910n) – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• HTC One DS (PN07710) – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• HTC Desire 626 (OPM9120) – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• HTC Desire 510 (OPCV200) – added Read/Write/Erase, Easy Repair*, Partition Manager, Constructor for Repair Files
• Samsung SM-J500FN – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• Samsung GT-I9505 – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• LG LS665 – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• HUAWEI Ascend Mate 7 (MT7-L09) – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files

🐙 Improved create GP partitions procedure

🐙 Added last selected folder setting save in Open Firmware dialog window

🐙 Uploaded new “Live logs” in to the Support Area

🐙 All pinouts and Repair procedures described in the manual ("Help" button in the software)

Download Octoplus JTAG PRO Software v.1.3.6

Find out more at: www.octoplusbox.com