Octoplus Box JTAG new update!

[namnhatrang]

Octoplus JTAG Software v.1.8.1 - LG F310L, L-04E USB repair and more!

Octoplus JTAG Software v.1.8.1 is out!

We have added boot repair via USB and small TP for LG F310L and LG L-04E.
Also added Boot/Device Repair for Samsung GT-I9210T and HTC Desire (PB99210) via JTAG.

Octoplus Box JTAG Software v.1.8.1 Release Notes

• Added support for the following models:

- LG F310L - added Dead Boot Repair via USB
- LG L-04E - added Dead Boot Repair via USB
- Samsung GT-I9210T - added Dead Boot/Device Repair
- HTC Desire (PB99210) - added Dead Boot/Device Repair, Repair IMEI, Repair CID, Unlock (via Read Codes) (thanks to mr. mathew_di)

• Improved connect procedure for Dead Boot Repair via USB for the following devices:

- LG P710
- LG P712
- LG P713, P713GO, P713TR
- LG P714
- LG P715
- LG P716

• All pinouts and Repair procedures are described in the manual ("Help" button in Software)

To repair F310L and LG L-04E via USB, please follow the next three steps:

1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
   (do NOT use any USB hubs!)
2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
   Drivers are in {Installation_Folder}\Driver\QHSUSB
3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

[YOUTUBEHD]HPsM3UC0rXk[/YOUTUBEHD]

Download Octoplus Box JTAG Software v.1.8.1

Find out more at: www.octoplusbox.com

[namnhatrang]

Octoplus JTAG v.1.8.2 - LG E960, F200x USB repair and more!

Octoplus JTAG Software v.1.8.2 is out!

We have added boot repair via USB and small TP for LG E960, F200K, F200L, F200S, F200LS
and via JTAG for Samsung GT-B5512 and LG F200L.

Octoplus Box JTAG Software v.1.8.2 Release Notes

• Added support for the following models:

- LG E960 - added Dead Boot / Device Repair via USB
- LG F200K - added Dead Boot Repair via USB
- LG F200L - added Dead Boot Repair via USB / JTAG
- LG F200LS - added Dead Boot Repair via USB
- LG F200S - added Dead Boot Repair via USB
- Samsung GT-B5512 - added Dead Boot / Device Repair via JTAG

• All pinouts and Repair procedures are described in the manual ("Help" button in Software)

To repair mentioned above devices via USB, please follow the next three steps:

1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
   (do NOT use any USB hubs!)
2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
   Drivers are in {Installation_Folder}\Driver\QHSUSB
3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

Download Octoplus Box JTAG Software v.1.8.2

Find out more at: www.octoplusbox.com

[namnhatrang]

Octoplus JTAG Software v.1.8.3 is out!

Octoplus JTAG Software v.1.8.3 is out!

We have added boot repair via USB and small TP for LG G3 D851, G2 Mini LTE-A D620, LG D620K, LG D620R
and via JTAG for ViewSonic ViewPad 7 (VS13761).

Octoplus Box JTAG Software v.1.8.3 Release Notes

• Added support for the following models:

- LG D851 - added Dead Boot / Device Repair via USB
- LG D620 - added Dead Boot Repair via USB
- LG D620K - added Dead Boot Repair via USB
- LG D620R - added Dead Boot Repair via USB
- ViewSonic ViewPad 7 (VS13761) - added Dead Boot / Device Repair via JTAG (thanks to Mr. Dr_Wolodya)

• Uploaded new Full Flash and Repair files for ZTE MF100 (128MB) (thanks to Mr. Dr_Wolodya)
• All pinouts and Repair procedures are described in the manual ("Help" button in Software)

To repair mentioned above devices via USB, please follow the next three steps:

1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port (do NOT use any USB hubs!)
2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
   Drivers are in {Installation_Folder}\Driver\QHSUSB
3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

[YOUTUBEHD]YL9sPeXoGWU[/YOUTUBEHD]

Download Octoplus Box JTAG Software v.1.8.3

Find out more at: www.octoplusbox.com

[namnhatrang]

Octoplus JTAG v.1.8.4 - added LG G3 series USB repair!

[/URL]

Octoplus JTAG Software v.1.8.4 is out!

We have added boot repair (all in Test Mode) via USB and small TP for LG G3 D852, D852G, D855, D855K and D855P.

Octoplus Box JTAG Software v.1.8.4 Release Notes

• Added support for the following models:

- LG D852 - added Dead Boot Repair via USB (Beta)
- LG D852G - added Dead Boot Repair via USB (Beta)
- LG D855 - added Dead Boot Repair via USB (Beta)
- LG D855K - added Dead Boot Repair via USB (Beta)
- LG D855P - added Dead Boot Repair via USB (Beta)

• All pinouts and Repair procedures are described in the manual ("Help" button in Software)

To repair mentioned above devices via USB, please follow the next three steps:

1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
   (do NOT use any USB hubs!)
2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
   Drivers are in {Installation_Folder}\Driver\QHSUSB
3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

Download Octoplus Box JTAG Software v.1.8.4

Find out more at: www.octoplusbox.com

[namnhatrang]

Octoplus JTAG Software v.1.8.5 is out!

Octoplus JTAG Software v.1.8.5 is out!

We have added Boot Repair via USB and small TP for LG Optimus LTE II F160LV, LG F160K, LG F160S
and via JTAG for ZTE P752D (Vodafone Smart Chat V865) and Huawei E171 (CPU: HiSilicon HI6731)!

Octoplus Box JTAG Software v.1.8.5 Release Notes

• Added support for the following models:

- LG F160LV - added Dead Boot / Device Repair via USB
- LG F160K - added Dead Boot Repair via USB
- LG F160S - added Dead Boot Repair via USB
- Huawei E171 (CPU: HiSilicon HI6731) - added Dead Boot / Device Repair via JTAG
- ZTE P752D - added Dead Boot / Device Repair via JTAG (thanks to Mr. Dr_Wolodya)

• All pinouts and Repair procedures are described in the manual ("Help" button in Software)

To repair mentioned above devices via USB, please follow the next three steps:

1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
   (do NOT use any USB hubs!)
2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
   Drivers are in {Installation_Folder}\Driver\QHSUSB
3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

Download Octoplus Box JTAG Software v.1.8.5

Find out more at: www.octoplusbox.com

[namnhatrang]

Octoplus JTAG Software v.1.8.6 - we have no rest!

Octoplus JTAG Software v.1.8.6 is out!

We have added Boot Repair via JTAG for LG Optimus LTE II F160LV, LG F160K, LG F160S
and via USB and small TP for LG F70 F370K, LG F370L, F370S.

Octoplus Box JTAG Software v.1.8.6 Release Notes

• Added support for the following models:

- LG F160LV - added Dead Boot/Device Repair via JTAG
- LG F160K - added Dead Boot Repair via JTAG
- LG F160S - added Dead Boot Repair via JTAG
- LG F370K - added Dead Boot Repair via USB
- LG F370L - added Dead Boot Repair via USB
- LG F370S - added Dead Boot Repair via USB

• All pinouts and Repair procedures are described in the manual ("Help" button in Software)

To repair mentioned above devices via USB, please follow the next three steps:

1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
   (do NOT use any USB hubs!)
2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
   Drivers are in {Installation_Folder}\Driver\QHSUSB
3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

[YOUTUBEHD]SA_zGLxmtHU[/YOUTUBEHD]

Download Octoplus Box JTAG Software v.1.8.6

Find out more at: www.octoplusbox.com

[namnhatrang]

Octoplus JTAG Software v.1.8.7 is out!

Octoplus JTAG Software v.1.8.7 is out!

We have added Boot Repair via USB and small TP for LG VS930 and LG F160L
and via JTAG for TeXet TM-3200R, Crius Q7A and Huawei G520-0000!

Octoplus Box JTAG Software v.1.8.7 Release Notes

• Added support for the following models:

- LG VS930 - added Dead Boot Repair via USB
- LG F160L - added Dead Boot Repair via USB
- TeXet TM-3200R - Dead Boot/Device Repair via JTAG (thanks to mr. Drunya_L)
- Crius Q7A - Dead Boot / Device Repair via JTAG (thanks to mr. DZ_Developer)
- Huawei G520-0000 - added Dead Boot Repair via JTAG (thanks to mr. Dr_Wolodya)

• All pinouts and Repair procedures are described in the manual ("Help" button in Software)

To repair LG VS930 and LG F160L via USB, please follow the next three steps:

1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
   (do NOT use any USB hubs!)
2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
   Drivers are in {Installation_Folder}\Driver\QHSUSB
3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

Download Octoplus Box JTAG Software v.1.8.7

Find out more at: www.octoplusbox.com

[namnhatrang]

Octoplus JTAG Software v.1.8.8 is out!

Octoplus JTAG Software v.1.8.8 is out!

We have added Boot Repair via USB and small TP for LG D165G, LG D415RD, LG VS870
and via JTAG for HTC HD7 (PD29100) and Huawei E586!

Octoplus Box JTAG Software v.1.8.8 Release Notes

• Added support for the following models:

- LG D165G - added Dead Boot Repair via USB
- LG D415RD - added Dead Boot Repair via USB
- LG VS870 - added Dead Boot / Device Repair via USB
- HTC HD7 (PD29100) - added Dead Boot Repair, Repair IMEI, Repair CID, Read Codes via JTAG (thanks to mr. Chromgsmunlock)
- Huawei E586 - added Dead Boot Repair via JTAG (thanks to mr. Dr_Wolodya)

• All pinouts and Repair procedures are described in the manual ("Help" button in Software)

To repair LG D165G, LG D415RD and LG VS870 via USB, please follow the next three steps:

1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
   (do NOT use any USB hubs!)
2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
   Drivers are in {Installation_Folder}\Driver\QHSUSB
3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

[YOUTUBEHD]oev1jcxD1TU[/YOUTUBEHD]

Download Octoplus Box JTAG Software v.1.8.8

Find out more at: www.octoplusbox.com

[namnhatrang]

Octoplus JTAG Software v.1.8.9 is out!

Octoplus JTAG Software v.1.8.9 is out!

We have added Boot Repair via USB and small TP for LG P930, LG LU6200
and via JTAG for HTC One M7 (PN0720000) and Huawei Y300-0000!

Octoplus Box JTAG Software v.1.8.9 Release Notes

• Added support for the following models:

- LG P930 - added Dead Boot Repair via USB
- LG LU6200 - added Dead Boot Repair via USB
- Huawei Y300-0000 - added Dead Boot Repair via JTAG (thanks to Mr. Dr_Wolodya)
- HTC One M7 (PN0720000) - added Dead Boot Repair, Repair IMEI, Repair CID via JTAG

• All pinouts and Repair procedures are described in the manual ("Help" button in Software)

To repair LG P930 and LG LU6200 via USB, please follow the next three steps:

1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
   (do NOT use any USB hubs!)
2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
   Drivers are in {Installation_Folder}\Driver\QHSUSB
3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

Download Octoplus Box JTAG Software v.1.8.9

Find out more at: www.octoplusbox.com

[namnhatrang]

Octoplus JTAG v.1.9.0 is out! [HR][/HR]

Octoplus JTAG Software v.1.9.0 is out!

We have added Boot Repair via USB and small TP for LG P935, LG P936, LG SU640 and via JTAG for ZTE Turkcell T40!

Octoplus Box JTAG Software v.1.9.0 Release Notes

• Added support for the following models:

- LG P935 - added Dead Boot Repair via USB
- LG P936 - added Dead Boot Repair via USB
- LG SU640 - added Dead Boot Repair via USB
- ZTE Turkcell T40 - added Dead Boot Repair via JTAG (thanks to Mr. mathew_di)

• All pinouts and Repair procedures are described in the manual ("Help" button in Software)

To repair LG P935, LG P936 and LG SU640 via USB, please follow the next three steps:

1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
   (do NOT use any USB hubs!)
2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
   Drivers are in {Installation_Folder}\Driver\QHSUSB
3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

Download Octoplus Box JTAG Software v.1.9.0