RIFF BOX JTAG New Update AE Post ở đây

[TuấnPhát_GSM]

22.10.2010 HTC Touch P3452 – HTC Elfin Ubrick – Boot repair supported



Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“HTC_Elf.dll” contains pinout, instructions and required repair files for HTC Touch P3452 – HTC Elfin unbrick/bootloader restore.

[TuấnPhát_GSM]

14.12.2010 CDMA Update, Samsung A900 Blade Unbrick/Dead boot repair supported

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.

“Samsung_A900.dll” contains pinout, instructions and required repair files for Samsung A900 Blade Unbrick/Dead boot repair.



14.12.2010 Samsung Z540 Unbrick/Dead boot repair supported


Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.

“Samsung_Z540.dll” contains pinout, instructions and required repair files for Samsung Z540 Unbrick/Dead boot repair.

[TuấnPhát_GSM]

24.01.2011 CDMA Update Haier C2076 Boot repair supported

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.

“Haier_C2076.dll” contains pinout, instructions and required repair files for Haier C2076 Boot repair Unbrick, Dead Boot repair.

http://www.jtagbox.com/wp-content/up...1/01/c2076.jpg

24.01.2011 CDMA Update – ZTE S100 Boot repair supported

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.

“ZTE_S100.dll” contains pinout, instructions and required repair files for ZTE S100 Unbrick, Dead Boot repair.

http://www.jtagbox.com/wp-content/up...1/zte_s100.jpg

[TuấnPhát_GSM]

26.01.2011 HTC Wings (HTC S730 US) Unbrick, Unlock, IMEI Repair supported


Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.

“HTC_Wings.dll” contains pinout, instructions and required repair files for HTC Wings (HTC S730 US) Unbrick, Unlock, IMEI Repair and Model ID repair.

RIFF Box – JTAG Revolution

[HoangThong_hotrokythuat4]

28.01.2011 Dell Streak (Dell Mini 5) Unbrick – Repair dead boot supported

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Dell_Streak.dll” contains pinout, instructions and required repair files for Dell Streak (Dell Mini 5) Unbrick – Repair dead boot.

[TuấnPhát_GSM]

31.01.2011 ZTE MF190 Broadband modem Unbrick, Dead boot repair supported

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“ZTE_MF190.dll” contains pinout, instructions and required repair files for ZTE MF190 Broadband modem Unbrick, Dead boot repair.


RIFF JTAG – ZTE MF190 Broadband modem Unbrick, Dead boot repair supported « RIFF Box – JTAG Revolution

[TuấnPhát_GSM]

Start the RIFF Box JTAG Manager, and switch to "Box Service" TAB:


On this screenshot You can see that box is in "Bootcore" mode.

* Click the three dots inside red square in order to open firmware file :

Firmware files are located in "C:\Program Files\RIFF Box JTAG Manager\Firmwares" folder. If there is no any files, You need first to perform "Check for Updates" procedure and download available files.

* Open latest Firmware file :


Click "Firmware Update" button :


As You can see, full path to selected firmware is now visible in "Firmware" file box. It will be stored into Windows registry.

* RIFF Box is now being updated. In case Box was in normal mode, it will be switched to "Bootcore" mode. You may need to install RIFF Box driver again !



Firmware update is now finished, and box is restarting to normal mode:



Now everything has been finished successfully and box has latest firmware :

[TuấnPhát_GSM]

09.02.2011 LG GT540 Optimus Unbrick – Repair Boot supported


Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.

“LG_GT540.dll” contains pinout, instructions and required repair files for LG GT540 Optimus Unbrick – Repair Dead Boot.

[TuấnPhát_GSM]

04.03.2011 Qualcom Generic NAND ESM7xxx DLL released

Resurrector ESM7XXX L41 D04 contains only DCC Loader, thus it is to be used only for operations on DCC Read/Write page in the JTAG Manager.
Embedded DCC Loader is designed to work inside of MCU's internal RAM memory, thus it is not sensitive to external SDRAM configuration or availability or its physical state.

Initial H/W init sequence will setup MCU's PLL0 with these parameters:

* L/M/N = 0x41/0x00/0x01;
* Global Clock Divisor = DIV4


If you don't know what the L, M, N or Global Clock Divisor parameters are, then just keep in mind:

* Highest L values and lowest Global Clock Divisor values will make maximum clocking frequency supplied to the MCU's core and thus DCC Read/Write speed will be maximum fast;

* Too high frequency supplied to the MCU's core may result in core overheating or instable operation;

..................

04.03.2011 Samsung G800 Unbrick, dead boot repair supported


Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Samsung_G800.dll” contains pinout, instructions and required repair files for Samsung G800 Unbrick, dead boot repair.


..................

03.03.2011 ZTE MF180S Broadband modem Unbrick/Repair supported


Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“ZTE_MF180S.dll” contains pinout, instructions and required repair files for ZTE MF180S Broadband modem Unbrick/Repair boot.


.................


RIFF Box – JTAG Revolution

[TuấnPhát_GSM]

10.03.2011 HTC Tattoo A3232 (HTC Click 1100) Unlock, Unbrick, IMEI repair, CID Update supported


Resurrecting HTC Click is easy. Phone is auto powered on with USB Data Cable connected to the PC while battery is inside.
There are two different hardware versions exist – one based on the MSM7225 chipset (CLIC10000) and other – on the ESM7225 chipset (CLIC11000). In resurrector settings you can select a desired version.
Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL to 0.52.0001 SPL version.
As well, you can change CID – for this make sure ‘Repair Custom ID’ field is checked in the Resurrection Guide dialog.
To resurrect HTC Click:

* Solder JTAG cable to HTC Click JTAG pads;
* Make sure HTC Click is selected in the list of models;
* Click Resurrect button;
* Wait till software signals a successful operation completion;
* Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
To Unlock HTC Click :

* Solder JTAG cable to HTC Click JTAG pads;
* Make sure HTC Click is selected in the list of models;
* Click Resurrect button;
* Select “Unlock Settings” TAB
* Select Unlock method
* Click “Unlock”


10.03.2011 HTC Desire DLL Update – Unlock Code reading supported


New HTC Desire DLL has additional option to select between reading NCK Code, or direct unlock.
This should also solve “error 0×45″ problem with some of the HW revisions.



10.03.2011 ASUS P526 Unbrick, Dead Boot repair supported


Resurrection of ASUS P526 is slightly complicated. JTAG pads are very small and sensitive thus extreme care must be taken when soldering wires to the board. Battery must be connected in order to establish JTAG connection.
Current resurrector re-flashes only the IPL area, and will not re-write MDOC XLOADER area (though write of this area is supported too).
Please note: DiskOnChip G4 memory has security features, due to which there is a risk of permanently blocking the access to the flash memory while re-flashing the XLOADER areas. Current resurrector will not touch the XLOADER zone, but it is possible you’re already holding such killed device in hands. If it is so you will see this error:
************************************************** **************
Detected a Not Initialized FLASH1 Chip ID: 0×0400/0xFBFF
ERROR: Selected FLASH Chip was not initialized by the DCC Loader
************************************************** **************
This can happen due to unknown protection keys used or due to permanently blocked MDOC chip. If latter is true we advise you to solder a new flash memory chip or throw this phone away to the trash bin.
To resurrect ASUS P526:

* Solder JTAG cable to ASUS P526 JTAG pads;
* Insert battery and connect USB cable to phone and PC;
* Make sure ASUS P526 is selected in the list of models;
* Click Resurrect button;
* Wait till software signals a successful operation completion;
* Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
If phone not enters download mode after resurrection then it means XLOADER was damaged too but memory chip is still usable. In this case repeat resurrection using RAM Downloader Mode and when USB connection is established reflash the phone with official firmware.
To enter download mode:

* Disconnect PC cable;
* Insert battery;
* Move ‘Lock’ slider down, hold ‘OK’ key (on the left) and press ‘Power ON’ button. In few seconds you should see TriColor picture.

Additional info:

* Phone has DiskOnChip G4 memory type, which has security features. It has two password protected partitions (Password1 = 12345678, Password2 = 00000000);
* XLOADER re-flash is not performed in this resurrector on purpose. While re-flashing the XLOADER area there is a risk of permanently blocking the memory chip.
* Any write access (Erase or Write) on MDOC NAND memory range 0×00000000 to 0x0017FFFF is rejected by the DCC Loader


10.03.2011 CDMA ZTE F285 Repair supported


Resurrecting ZTE F285 is simple. Phone is auto powered on with USB Data Cable connected to the PC. Battery presence is not required; connection can be established with detached board. Resurrector re-flashes only firmware zone of the phone (0×000000 to 0x60FFFF).

To resurrect ZTE F285:

* Solder JTAG cable to ZTE F285 JTAG pads;
* Insert USB Data cable into board and PC;
* Make sure ZTE F285 is selected in the list of models;
* Click Resurrect button;
* Wait till software signals a successful operation completion;
* De-solder JTAG wires;


10.03.2011 RIFF JTAG Manager v1.27, RIFF Box Firmware v1.19
Whats new :
RIFF JTAG Manager v1.27

* Fixed access violation bug upon JTAG Manager startup if there is no RIFF Box detected and Cancel button is clicked.
* (SDK): more functions are now available (exported) for future Resurrector DLLs;
* Added flags for JTAG Manager to be able to retrieve memory chip size from the DCC Loader.
* Fixed initialization bug for NOR-related DCC Loadererss
* ScriptEngine: added options pocessing ‘/byte’, ‘/word’, ‘/long’ to data.save.binary instruction: thus it’s possible now to read memory through script using desired bus access width (8-,16-, or 32-bit widths). For example: “data.save.binary c:\myfile.bin 0×00..0x11FF /word” – will read 0×1200 bytes from memory into myfile.bin file starting from address 0×00 using 16-bit bus accesses.

Note: “Read Memory” button on the JTAG Read/Write page reads memory using 32-bit bus accesses only.
RIFF Box Firmware v1.19

* Added more H/W script (*.has) instructions;
* Added HTC security processing functions;

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.