Medusa Box v.2.4.1 is out!

We have added boot repair via USB and small TP for:
LG D370, D370TR, D373, D373EU, D375, D410, D410H, D410HN,
which are detected by PC as "Qualcomm HS-USB QDloader 9008" device!

Also added repair via JTAG interface for:
Huawei G510-0010 and Y301-A1 (MetroPCS)!

Medusa Box v.2.4.1 Release Notes:
- Added support for the following models:
  • LG D370 - added Dead Boot Repair via USB
  • LG D370TR - added Dead Boot Repair via USB
  • LG D373 - added Dead Boot Repair via USB
  • LG D373EU - added Dead Boot Repair via USB
  • LG D375 - added Dead Boot Repair via USB
  • LG D410 - added Dead Boot / Device Repair
  • LG D410H - added Dead Boot Repair
  • LG D410NH - added Dead Boot Repair
  • Huawei G510-0010 - added Dead Boot Repair (thanks to Mr. Dr_Wolodya)
  • Huawei Y301-A1 (MetroPCS) - added Dead Boot Repair (thanks to Mr. Dr_Wolodya)

- All pinouts and Repair procedures are described in the manual ("Help" button in Software).

To repair mentioned above devices via USB, please follow the next three steps:
  1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
    (do NOT use any USB hubs!)
  2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
    Drivers are in {Installation_Folder}\Driver\QHSUSB
  3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)


Medusa - Ultimate Breakthrough in the Phone Repair!

[YOUTUBEHD]kFkt8F_mjIY[/YOUTUBEHD]

Download Medusa Box v.2.4.1