+ Trả lời bài viết
Trang 6 của 13 Đầu tiênĐầu tiên 1 2 3 4 5 6 7 8 9 10 11 12 13 CuốiCuối
Kết quả 51 tới 60 của 129
  1. #51
    Super Moderator namnhatrang's Avatar
    Ngày tham gia
    Jan 2007
    Bài viết
    4,576
    Cám ơn !!!
    33
    Thanked 230 Times in 175 Posts

    Mặc định

    [/URL]
    Octoplus JTAG Software v1.7.1 is out!

    WE have added world's first FREE IMEI Repair and FREE Sony C1604, C1605, Sony ST23i, ST23a, ST23i2, ST23a2 Unlock via JTAG (no server, no credits, no queues, no limits).
    Also added support for Samsung SPH-L720T, Huawei U2800a (MetroPCS) and ZTE Open!

    Octoplus Box JTAG Software v1.7.1 Release Notes

    • Added support for the following models:
    - Sony C1604 - added world's first Unlock, Repair IMEI, improved Repair operation
    - Sony C1605 - added world's first Unlock, Repair IMEI, improved Repair operation
    - Sony ST23i - added world's first Unlock, Repair IMEI, improved Repair operation
    - Sony ST23a - added world's first Unlock, Repair IMEI, improved Repair operation
    - Sony ST23i2 - added world's first Unlock, Repair IMEI, improved Repair operation
    - Sony ST23a2 - added world's first Unlock, Repair IMEI, improved Repair operation
    - Samsung SPH-L720T - added Dead Boot/Device Repair
    - Huawei U2800a (MetroPCS) - added Dead Boot/Device Repair (thanks to Mr. Dr_Wolodya)
    - ZTE Open - added Dead Boot/Device Repair (thanks to Mr. Dr_Wolodya).
    • All pinouts and Repair procedures are described in Software manual ("Help" button in Software).



    [YOUTUBEHD]mYjQTb5mR_Y[/YOUTUBEHD]



    [YOUTUBEHD]jk0FycLcKu8[/YOUTUBEHD]

    Download Octoplus Box JTAG Software v1.7.1
    Find out more at: www.octoplusbox.com

  2. #52
    Super Moderator namnhatrang's Avatar
    Ngày tham gia
    Jan 2007
    Bài viết
    4,576
    Cám ơn !!!
    33
    Thanked 230 Times in 175 Posts

    Mặc định

    Octoplus JTAG Software v.1.7.2 is out!

    WE have added boot repair via USB for LG E435, E435F, LG E435G, LG E435K, which are detected by PC as "Qualcomm HS-USB QDloader 9008" device!
    Also added repair via Jtag interface for Prestigio MultiPhone PAP4020 DUO, ZTE Z990G and Samsung SGH-Z370.

    Octoplus Box JTAG Software v.1.7.2 Release Notes

    • Added support for the following models:
    - LG E435 - added Dead Boot Repair via USB
    - LG E435F - added Dead Boot Repair via USB
    - LG E435G - added Dead Boot Repair via USB
    - LG E435K - added Dead Boot Repair via USB
    - Prestigio MultiPhone PAP4020 DUO - added Dead Boot/Device Repair (thanks to Mr. Dr_Wolodya)
    - ZTE Z990G - added Dead Boot/Device Repair (thanks to Mr. Dr_Wolodya)
    - Samsung SGH-Z370 - added Dead Boot/Device Repair (thanks to Mr. Dr_Wolodya)
    • All pinouts and Repair procedures are described in the manual ("Help" button in Software).




    [YOUTUBEHD]EoGvGYWOJbI[/YOUTUBEHD]

    Download Octoplus Box JTAG Software v.1.7.2
    Find out more at: www.octoplusbox.com

  3. #53
    Super Moderator namnhatrang's Avatar
    Ngày tham gia
    Jan 2007
    Bài viết
    4,576
    Cám ơn !!!
    33
    Thanked 230 Times in 175 Posts

    Mặc định

    Octoplus JTAG v.1.7.3 - more LG models added for USB repair!

    [/URL]
    Octoplus JTAG Software v.1.7.3 is out!

    We have added boot repair via USB and small TP for LG D321, D325, D325F8, D325G8, P700, P705, P705f, P705f, P705GO, P708g, P710, P712, P713, P713GO, P713TR, P714, P715, P716, which are detected by PC as "Qualcomm HS-USB QDloader 9008" device!
    Also added repair via JTAG interface for HTC Desire 300 (0P6A100)!

    Octoplus Box JTAG Software v.1.7.3 Release Notes

    • Added support for the following models:

    - LG D321 (based on MSM8610) - added Dead Boot Repair via USB
    - LG D325 (based on MSM8610) - added Dead Boot/Phone Repair via USB
    - LG D325 (based on MSM8210) - added Dead Boot/Phone Repair via USB (in test mode)
    - LG D325F8 (based on MSM8610) - added Dead Boot Repair via USB
    - LG D325G8 (based on MSM8610) - added Dead Boot Repair via USB
    - LG P700 - added Dead Boot Repair via USB
    - LG P705 - added Dead Boot Repair via USB
    - LG P705F - added Dead Boot Repair via USB
    - LG P705GO - added Dead Boot Repair via USB
    - LG P708G - added Dead Boot Repair via USB
    - LG P710 - added Dead Boot Repair via USB
    - LG P712 - added Dead Boot Repair via USB
    - LG P713 - added Dead Boot Repair via USB
    - LG P713GO - added Dead Boot Repair via USB
    - LG P713TR - added Dead Boot Repair via USB
    - LG P714 - added Dead Boot Repair via USB
    - LG P715 - added Dead Boot Repair via USB
    - LG P716 - added Dead Boot Repair via USB
    - HTC Desire 300 (0P6A100) - added Dead Boot Repair, Repair CID, Repair IMEI (thanks to Mr. Dr_Wolodya)
    • All pinouts and Repair procedures are described in the manual ("Help" button in Software).

    • To repair mentioned above devices via USB, do next steps:
    1. Attach testpoint as shown on Figure 1 in Software manual, and connect phone with Micro USB cable directly to mainboard USB port (don´t use USB hubs!).
    2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you had´nt installed a driver. Drivers are in {Installation_Folder}\Driver\QHSUSB.
    3. Release testpoint and press EasyRepair button in software (or Connect button, when in Advanced Mode).


    [YOUTUBEHD]RpvvAeD08b4[/YOUTUBEHD]
    Download Octoplus Box JTAG Software v.1.7.3
    Find out more at: www.octoplusbox.com

  4. #54
    Super Moderator namnhatrang's Avatar
    Ngày tham gia
    Jan 2007
    Bài viết
    4,576
    Cám ơn !!!
    33
    Thanked 230 Times in 175 Posts

    Mặc định

    Octoplus JTAG v.1.7.4 - more LG devices added for USB repair!

    [/URL]
    Octoplus JTAG Software v.1.7.4 is out!

    We have added boot repair via USB and small TP for LG D320, D320F, D320N, D380, D385, MS323,
    which are detected by PC as "Qualcomm HS-USB QDloader 9008" device!

    Also added repair via JTAG interface for LG C410, ZTE Z993, Samsung GT-B6520!

    Octoplus Box JTAG Software v.1.7.4 Release Notes

    • Added support for the following models:
    - LG D320 - added Dead Boot Repair via USB
    - LG D320F - added Dead Boot Repair via USB
    - LG D320N - added Dead Boot Repair via USB
    - LG D380 - added Dead Boot / Device Repair via USB
    - LG D385 - added Dead Boot Repair via USB
    - LG MS323 - added Dead Boot Repair via USB
    - LG C410 - added Dead Boot / Device Repair
    - ZTE Z993 - added Dead Boot Repair (thanks to Mr. Dr_Wolodya)
    - Samsung GT-B6520 - added Dead Boot Repair (thanks to Mr. Dr_Wolodya)
    • All pinouts and Repair procedures are described in the manual ("Help" button in Software).

    To repair mentioned above devices via USB, please follow the next three steps:
    1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
      (do NOT use any USB hubs!)
    2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
      Drivers are in {Installation_Folder}\Driver\QHSUSB
    3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)




    https://www.youtube.com/watch?v=LqSQUnpYkJU

    Download Octoplus Box JTAG Software v.1.7.4
    Find out more at: www.octoplusbox.com

  5. #55
    Super Moderator namnhatrang's Avatar
    Ngày tham gia
    Jan 2007
    Bài viết
    4,576
    Cám ơn !!!
    33
    Thanked 230 Times in 175 Posts

    Mặc định

    Octoplus JTAG Software v.1.7.5 is out!

    We have added boot repair via USB and small TP for LG D370, D370TR, D373, D373EU, D375, D410, D410H, D410HN,
    which are detected by PC as "Qualcomm HS-USB QDLoader 9008" device!

    Also added repair via JTAG interface for Huawei G510-0010 and Y301-A1 (MetroPCS)!

    Octoplus Box JTAG Software v.1.7.5 Release Notes

    • Added support for the following models:
    - LG D370 - added Dead Boot Repair via USB
    - LG D370TR - added Dead Boot Repair via USB
    - LG D373 - added Dead Boot Repair via USB
    - LG D373EU - added Dead Boot/Device Repair via USB
    - LG D375 - added Dead Boot Repair via USB
    - LG D410 - added Dead Boot/Device Repair via USB
    - LG D410H - added Dead Boot Repair via USB
    - LG D410NH - added Dead Boot Repair via USB
    - Huawei G510-0010 - added Dead Boot Repair (thanks to Mr. Dr_Wolodya)
    - Huawei Y301-A1 (MetroPCS) - added Dead Boot Repair (thanks to Mr. Dr_Wolodya)
    • All pinouts and Repair procedures are described in the manual ("Help" button in Software).


    To repair mentioned above devices via USB, please follow the next three steps:
    1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
      (do NOT use any USB hubs!)
    2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
      Drivers are in {Installation_Folder}\Driver\QHSUSB
    3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)




    [YOUTUBEHD]b1PZaFGVAcE[/YOUTUBEHD]



    Download Octoplus Box JTAG Software v.1.7.5
    Find out more at: www.octoplusbox.com

  6. #56
    Super Moderator namnhatrang's Avatar
    Ngày tham gia
    Jan 2007
    Bài viết
    4,576
    Cám ơn !!!
    33
    Thanked 230 Times in 175 Posts

    Mặc định

    Octoplus JTAG Software v.1.7.6 is out!

    We have added boot repair via USB and small TP for LG D170, D175F, D180F, D400H, D400HN, D405, D405H, D405N, D405TR, D415, D724,
    which are detected by PC as "Qualcomm HS-USB QDloader 9008" device!


    Octoplus Box JTAG Software v.1.7.6 Release Notes

    • Added support for the following models:
    - LG D170 - added Dead Boot/Device Repair via USB
    - LG D175F - added Dead Boot Repair via USB
    - LG D180F - added Dead Boot Repair via USB
    - LG D400H - added Dead Boot Repair via USB
    - LG D400HN - added Dead Boot Repair via USB
    - LG D405 - added Dead Boot Repair via USB
    - LG D405H - added Dead Boot Repair via USB
    - LG D405N - added Dead Boot Repair via USB
    - LG D405TR - added Dead Boot Repair via USB
    - LG D415 - added Dead Boot Repair via USB
    - LG D724 - added Dead Boot/Device Repair via USB
    • All pinouts and Repair procedures are described in the manual ("Help" button in Software).


    To repair mentioned above devices via USB, please follow the next three steps:
    1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
      (do NOT use any USB hubs!)
    2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
      Drivers are in {Installation_Folder}\Driver\QHSUSB
    3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)


    [YOUTUBEHD]FOuSSbu5OMo[/YOUTUBEHD]



    [YOUTUBEHD]HHXQKOO0mc8[/YOUTUBEHD]

    Download Octoplus Box JTAG Software v.1.7.6
    Find out more at: www.octoplusbox.com

  7. #57
    Super Moderator namnhatrang's Avatar
    Ngày tham gia
    Jan 2007
    Bài viết
    4,576
    Cám ơn !!!
    33
    Thanked 230 Times in 175 Posts

    Mặc định

    Octoplus JTAG Software v.1.7.7 is out!

    We have added boot repair via USB and small TP for LG E980, E980H, LG E985T, E986, LG E988, LG E989,
    which are detected by PC as "Qualcomm HS-USB QDloader 9008" device! Also added repair via JTAG interface for Gigabyte GSmart G1317D.


    Octoplus Box JTAG Software v.1.7.7 Release Notes

    • Added support for the following models:
    - LG E980 - added Dead Boot/Device Repair via USB.
    - LG E980H - added Dead Boot Repair via USB.
    - LG E985T - added Dead Boot Repair via USB.
    - LG E986 - added Dead Boot Repair via USB.
    - LG E988 - added Dead Boot Repair via USB.
    - LG E989 - added Dead Boot Repair via USB.
    - Gigabyte GSmart G1317D - added Dead Boot Repair (thanks to Mr. Dr_Wolodya).
    • All pinouts and Repair procedures are described in the manual ("Help" button in Software).


    To repair mentioned above devices via USB, please follow the next three steps:
    1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
      (do NOT use any USB hubs!)
    2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
      Drivers are in {Installation_Folder}\Driver\QHSUSB
    3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)


    [YOUTUBEHD]x3Bftl1WelM[/YOUTUBEHD]

    Download Octoplus Box JTAG Software v.1.7.7
    [INDENT][INDENT][INDENT][INDENT][INDENT]Find out more at: [URL="http://octoplusbox.com/"]

  8. #58
    Super Moderator namnhatrang's Avatar
    Ngày tham gia
    Jan 2007
    Bài viết
    4,576
    Cám ơn !!!
    33
    Thanked 230 Times in 175 Posts

    Mặc định

    Octoplus JTAG Software v.1.7.8 is out!

    We have added boot repair via USB and small TP for LG D150, D157F, D160, D160F, D160G,
    which are detected by PC as "Qualcomm HS-USB QDloader 9008" device!


    Also added repair via JTAG interface for Samsung SGH-T479B and ZTE V880G.

    Octoplus Box JTAG Software v.1.7.8 Release Notes

    • Added support for the following models:

    - LG D150 - added Dead Boot/Device Repair via USB
    - LG D157F - added Dead Boot Repair via USB
    - LG D160 - added Dead Boot/Device Repair via USB
    - LG D160F - added Dead Boot Repair via USB
    - LG D160G - added Dead Boot Repair via USB
    - Samsung SGH-T479B - added Dead Boot/Device Repair
    - ZTE V880G - added Dead Boot Repair (thanks to Mr. Dr_Wolodya)
    • All pinouts and Repair procedures are described in the manual ("Help" button in Software).


    To repair mentioned above devices via USB, please follow the next three steps:
    1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
      (do NOT use any USB hubs!)
    2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
      Drivers are in {Installation_Folder}\Driver\QHSUSB
    3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)
    [YOUTUBEHD]aqMfb3HOFe4[/YOUTUBEHD]

    Download Octoplus Box JTAG Software v.1.7.8
    Find out more at: www.octoplusbox.com

  9. #59
    Super Moderator namnhatrang's Avatar
    Ngày tham gia
    Jan 2007
    Bài viết
    4,576
    Cám ơn !!!
    33
    Thanked 230 Times in 175 Posts

    Mặc định

    Octoplus JTAG Software v.1.7.9 is out!

    We have added boot repair via USB and small TP for LG D280N, D280G, LG D285, D285F, D285G, D315, D315K,
    which are detected by PC as "Qualcomm HS-USB QDloader 9008" device!


    Octoplus Box JTAG Software v.1.7.9 Release Notes

    • Added support for the following models:
    - LG D280N - added Dead Boot Repair via USB
    - LG D280G - added Dead Boot Repair via USB
    - LG D285 - added Dead Boot/Device Repair via USB
    - LG D285F - added Dead Boot Repair via USB
    - LG D285G - added Dead Boot Repair via USB
    - LG D315 - added Dead Boot Repair via USB
    - LG D315K - added Dead Boot/Device Repair
    • Added new Core ID (107180E1) for Qualcomm APQ8064
    • All pinouts and Repair procedures are described in the manual ("Help" button in Software)

    To repair mentioned above devices via USB, please follow the next three steps:
    1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
      (do NOT use any USB hubs!)
    2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
      Drivers are in {Installation_Folder}\Driver\QHSUSB
    3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)




    [YOUTUBEHD]Dta6l56UaY4[/YOUTUBEHD]



    [YOUTUBEHD]lXtruxV0ErI[/YOUTUBEHD]

    Download Octoplus Box JTAG Software v.1.7.9
    Find out more at: www.octoplusbox.com

  10. #60
    Super Moderator namnhatrang's Avatar
    Ngày tham gia
    Jan 2007
    Bài viết
    4,576
    Cám ơn !!!
    33
    Thanked 230 Times in 175 Posts

    Mặc định

    Octoplus JTAG Software v.1.8.0 is out!

    We have added boot repair via USB and small TP for LG D618, F240K, F240L, F240S and via JTAG for Samsung GT-S5302!

    Octoplus Box JTAG Software v.1.8.0 Release Notes

    • Added support for the following models:
    - LG D618 - added Dead Boot/Device Repair via USB
    - LG F240K - added Dead Boot Repair via USB
    - LG F240L - added Dead Boot Repair via USB
    - LG F240S - added Dead Boot Repair via USB
    - Samsung GT-S5302 - added Dead Boot/Device Repair
    • All pinouts and Repair procedures are described in the manual ("Help" button in Software)


    To repair LG D618, F240K / L / S via USB, please follow the next three steps:
    1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
      (do NOT use any USB hubs!)
    2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
      Drivers are in {Installation_Folder}\Driver\QHSUSB
    3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)




    [YOUTUBEHD]13kjUk3EZes[/YOUTUBEHD]



    [YOUTUBEHD]eNyk8ekcVas[/YOUTUBEHD]

    Download Octoplus Box JTAG Software v.1.8.0
    Find out more at: www.octoplusbox.com

+ Trả lời bài viết

Thread Information

Users Browsing this Thread

Hiện có 1 người đang xem bài này . Bao gồm : 0 thành viên và 1 khách

     

Similar Threads

  1. Octoplus Box JTAG Updates
    By Lính Khang in forum Octopus/Octoplus Box
    Trả lời: 6
    Bài viết cuối: 20-11-2013, 23:34
  2. Octoplus Box JTAG v1.3.5 - going further!
    By toilatoi142001 in forum THÔNG TIN CẬP NHẬT MỚI NHẤT CỦA THIẾT BỊ
    Trả lời: 0
    Bài viết cuối: 05-10-2013, 10:12
  3. Octoplus Box JTAG Software v1.3.2 - HTC One S, 8X and more!
    By toilatoi142001 in forum THÔNG TIN CẬP NHẬT MỚI NHẤT CỦA THIẾT BỊ
    Trả lời: 0
    Bài viết cuối: 14-09-2013, 10:07
  4. Octoplus Samsung V1.1.1 and JTAG v1.1.0
    By toilatoi142001 in forum THÔNG TIN CẬP NHẬT MỚI NHẤT CỦA THIẾT BỊ
    Trả lời: 0
    Bài viết cuối: 13-04-2013, 10:08
  5. Octoplus Box JTAG Updates
    By Lính Khang in forum THÔNG TIN CẬP NHẬT MỚI NHẤT CỦA THIẾT BỊ
    Trả lời: 0
    Bài viết cuối: 02-02-2013, 08:38

Quyền viết bài

  • Bạn không thể tạo chủ đề mới
  • Bạn không thể gửi trả lời
  • Bạn không thể gửi đính kèm
  • Bạn không thể sửa bài viết của bạn
Lên đầu trang
thiet bi sua chua slim sim, heicard, sim ghep Firmware android giải pháp nhà thông minh